Script problem
Can somebody tell me what's wrong in this script? I'm a begginer in traffic shaping and I can't figure it out
#!/bin/sh
DEV="dev eth1"
tc qdisc del $DEV root
tc qdisc add $DEV root handle 10: prio
tc qdisc add $DEV parent 10:1 handle 20: est 1sec 8sec bfifo
tc qdisc add $DEV parent 10:2 handle 30: est 1sec 8sec bfifo
tc qdisc add $DEV parent 10:3 handle 40: est 1sec 8sec bfifo
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x10 0xff flowid 10:1
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x06 0xff flowid 10:2
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x0c 0xff flowid 10:3
Thanks a lot alexCOS
Quoted 2 lines · Alexandru Coseru
Can somebody tell me what's wrong in this script? I'm a begginer in
traffic shaping and I can't figure it out
But what's the problem? Is it not working? Do you get any errors if you execute this script?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Yes.. this is the error part:
[root@alexcos root]# tc qdisc del dev eth1 root
[root@alexcos root]# tc qdisc add dev eth1 root handle 10: prio [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1sec 8 sec bfifo
Unknown qdisc "1sec", hence option "8" is unparsable [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1 sec 8 sec bfifo
Unknown qdisc "1", hence option "sec" is unparsable
Full source script:
tc qdisc del $DEV root
tc qdisc add $DEV root handle 10: prio
tc qdisc add $DEV parent 10:1 handle 20: est 1sec 8sec bfifo
tc qdisc add $DEV parent 10:2 handle 30: est 1sec 8sec bfifo
tc qdisc add $DEV parent 10:3 handle 40: est 1sec 8sec bfifo
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x10 0xff flowid 10:1
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x06 0xff flowid 10:2
tc filter add $DEV parent 10: protocol ip prio 1 u32 match ip tos 0x0c 0xff flowid 10:3
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Alexandru Coseru" <[email protected]>; <[email protected]>
Sent: Monday, May 05, 2003 10:49 AM
Subject: Re: [LARTC] Script problem
Quoted 6 lines · Alexandru Coseru
Quoted 2 lines
Can somebody tell me what's wrong in this script? I'm a begginer in
traffic shaping and I can't figure it outBut what's the problem? Is it not working? Do you get any errors if you execute this script?
Quoted 9 lines
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Alexandru Coseru
Yes.. this is the error part:
[root@alexcos root]# tc qdisc del dev eth1 root
[root@alexcos root]# tc qdisc add dev eth1 root handle 10: prio [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1sec 8 sec bfifo
Unknown qdisc "1sec", hence option "8" is unparsable [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1 sec 8 sec bfifo
Unknown qdisc "1", hence option "sec" is unparsable
I don't know the syntac for the bfifo qdisc. But what if you simple remove some parameters :
tc qdisc add dev eth1 parent 10:1 handle 20: bfifo
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
it worked... thanks..
I'm gonna test it later to see if it really works & shapes the traffic..
One more question though ...
Can I add more than 3 (three) bands ?
Like:
tc qdisc add dev eth1 parent 10:1 handle 20:bfifo tc qdisc add dev eth1 parent 10:2 handle 30:bfifo tc qdisc add dev eth1 parent 10:3 handle 40:bfifo tc qdisc add dev eth1 parent 10:4 handle 50:bfifo
of course , i get an error at the last line... but can I do it in another way ?
Thanks
Alex
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Alexandru Coseru" <[email protected]>
Cc: <[email protected]>
Sent: Monday, May 05, 2003 10:08 PM
Subject: Re: [LARTC] Script problem
Quoted 7 lines · Alexandru Coseru
Quoted 6 lines
Yes.. this is the error part:
[root@alexcos root]# tc qdisc del dev eth1 root [root@alexcos root]# tc qdisc add dev eth1 root handle 10: prio [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est
1sec 8
Quoted 3 lines
Quoted 3 lines
sec bfifo
Unknown qdisc "1sec", hence option "8" is unparsable [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1
sec
Quoted 3 lines
Quoted 2 lines
8 sec bfifo
Unknown qdisc "1", hence option "sec" is unparsableI don't know the syntac for the bfifo qdisc. But what if you simple
remove
Quoted 4 lines
some parameters :
tc qdisc add dev eth1 parent 10:1 handle 20: bfifo
Quoted 10 lines
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Alexandru Coseru
it worked... thanks..
I'm gonna test it later to see if it really works & shapes the traffic..
One more question though ...
Can I add more than 3 (three) bands ?
Like:
Quoted 8 lines
tc qdisc add dev eth1 parent 10:1 handle 20:bfifo tc qdisc add dev eth1 parent 10:2 handle 30:bfifo tc qdisc add dev eth1 parent 10:3 handle 40:bfifo tc qdisc add dev eth1 parent 10:4 handle 50:bfifo
of course , i get an error at the last line... but can I do it in another way ?
Isn't there an option if you add the prio qdisc to specify the number of bands?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
: > One more question though ...
: > Can I add more than 3 (three) bands ?
: > of course , i get an error at the last line... but can I do it in another : > way ?
: Isn't there an option if you add the prio qdisc to specify the number of : bands?
Yes.
http://lartc.org/howto/lartc.qdisc.classful.html#AEN886
<snipped>
9.5.3.1. PRIO parameters & usage
The following parameters are recognized by tc:
bands
Number of bands to create. Each band is in fact a class. If you change this number, you must also change:
</snipped>
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/