Skip to contentSkip to conversation

teql and gre tunnel

LARTC Eric Leblond 1 participant 1 message May 7, 2003

lore
Share & tools
lore
#0 lore raw

Hi everybody,

I want to do the following setup :

           |      | Tun1 - Link 1                        | Tun1  |      |
Router A   | teql |                   INTERNET    Link - |       | teql |router B
	   |      | Tun2 - Link 2			 | Tun2  |      |

This should permit to agregate Link 1 and Link 2 (less the cost of the encapsulation). The two tunnels are GRE ip tunnel.

It seems to work fine in theory : I manage to send packet on the teql from one of the node (debian sid with kernel 2.4.20-686).

But I've got a problem to put a teql qdisc on the tunnel on one of the node. When doing :
tc qdisc add dev tun1 root teql0
I only manage to have an RTnetlink message.
But when doing :
tc qdisc add dev eth0 root teql0
It works fine.
The second router is debian woody based with a from sid backported tc and a 2.4.20 home made kernel.

Is there a special requirement to have this working ?

BR,

Signature · 4 lines
Eric Leblond <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/