Skip to contentSkip to conversation

compiling kernel 2.4.20 for iproute2

LARTC Lucas Aimaretto 2 participants 2 messages May 8, 2003

lore
Share & tools
lore
#0 lore raw

hi there.
I've been looking around the web and found the following instructions on how to configure the kernel sources for implementing QoS.

This page http://diffserv.sourceforge.net/#24 shows what is it necesary to compile into the kernel to be able to shape traffic.

Everything went ok, except for the first option:

Kernel/User netlink socket (CONFIG_NETLINK)

I just could not find it.

Does anybody know what is this option about?

I've got kernel 2.4.20 and there is no such option.

So, what do I do if I want QoS?

thank you

regards

lucas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Lucas Aimaretto

hi there.
I've been looking around the web and found the following instructions on how to configure the kernel sources for implementing QoS.

This page http://diffserv.sourceforge.net/#24 shows what is it necesary to compile into the kernel to be able to shape traffic.

Everything went ok, except for the first option:

Quoted 7 lines

Kernel/User netlink socket (CONFIG_NETLINK)

I just could not find it.

Does anybody know what is this option about?

I've got kernel 2.4.20 and there is no such option.

There is no such option anymore.
Just enable all options under "QoS and/or fair queueing". You do choose to compile them as module or in the kernel.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/