LARTC] 2 gateway on linux
Dear,
I have setup two isp connection on ppp0 and ppp1 on Red Hat linux 7.3 now i want to route my all network request on both network. When I
have single ppp0 connection I use this script /sbin/iptables --table nat --append POSTROUTING -s 192.168.0.1/24 --out-interface ppp0 -j MASQUERADE/sbin/iptables --append FORWARD --in-interface eth0 -j ACCEPT Now I have setup two interface for internet ppp0 and ppp1, now what should I change in my script. I am trying to use two dialup link for load sharing.Further -Martin advice me to add this line in my script /sbin/iptables -table nat --append POSTROUTING -s 192.168.0.1/24 --out-interface ppp1 -j MASQUERADEand# turn off reverse path filtering
# echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter # echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter # echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter # echo 0 > /proc/sys/net/ipv4/conf/ppp0/rp_filter # echo 0 > /proc/sys/net/ipv4/conf/ppp1/rp_filter and he also advice me to read Nano-HOWTO, so anyone know from where I can find this document. thanks to Martin and others whose help me to solve this problem.
---------------------------------
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
Mohammad,
: and he also advice me to read Nano-HOWTO, so anyone know from where I : can find this document. thanks to Martin and others whose help me to : solve this problem.
Sorry to have forgotten to send you the link to the Nano-HOWTO.
http://www.ssi.bg/~ja/nano.txt
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/