Skip to contentSkip to conversation

Total Bandwidth

LARTC Tom Olexa 2 participants 2 messages May 13, 2003

lore
Share & tools
lore

Tom Olexa

author
#0 lore raw

Hello,
has anyone tested
9.5.4.4. in Adv-Routing-HOWTO?

Does it work?

For me (matching ip adresses)
tc -s -d class ls dev eth0
says it's going thru appropriate classes, but no shaping occurs.

I need to limit per host connection and the total connection,this example should do something very similar. I can't get it working.

Any suggestions?

Thanks,
Tom Olexa

Signature · 7 lines
Ziskejte kvalitu, kterou si zasluhujete. Za minimalni mesicni
poplatek vam nabizime Antivir, Antispam nebo dalsi kapacitu pro
vas Mailbox. Vice na: http://sluzby.volny.cz/product/postpaid/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 4 lines · Tom Olexa

Hello,
has anyone tested
9.5.4.4. in Adv-Routing-HOWTO?

Quoted 8 lines

Does it work?

For me (matching ip adresses)
tc -s -d class ls dev eth0
says it's going thru appropriate classes, but no shaping occurs.

I need to limit per host connection and the total connection,this example should do something very similar. I can't get it working.

I did some cbq tests and it works like I expected. You can find the results on www.docum.org.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/