Hashing filters
In addition:
Does anybody know if tc filters support nested hash tables? Trying:
tc filter add dev $IF parent 30:0 prio 5 protocol ip u32
tc filter add dev $IF parent 30:0 prio 5 handle 2: protocol ip u32 divisor 256 tc filter add dev $IF parent 30:0 prio 5 handle 3: u32 ht 2:0: divisor 256 tc filter add dev $IF parent 30:0 prio 5 u32 ht 3:6: match ip dst 192.168.0.6 flowid 30:6
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x0000ff00 at 12 link 2:
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:Doesn't work. Traffic never goes to class 30:6 but stays unclassified. Any suggestions?
Thank you.
Michael
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines
tc filter add dev $IF parent 30:0 prio 5 protocol ip u32
tc filter add dev $IF parent 30:0 prio 5 handle 2: protocol ip u32 divisor 256 tc filter add dev $IF parent 30:0 prio 5 handle 3: u32 ht 2:0: divisor 256 tc filter add dev $IF parent 30:0 prio 5 u32 ht 3:6: match ip dst 192.168.0.6 flowid 30:6
Quoted 7 lines
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x0000ff00 at 12 link 2: tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \ match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:Doesn't work. Traffic never goes to class 30:6 but stays unclassified. Any suggestions?
Because traffic goes to 2:X filters.
Put
Quoted 2 lines
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:
before the 2: test.
Quoted 7 lines
Thank you.
Michael
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
Catalin(ux) BOIE
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines
Quoted 10 lines
tc filter add dev $IF parent 30:0 prio 5 protocol ip u32
tc filter add dev $IF parent 30:0 prio 5 handle 2: protocol ip u32 divisor 256 tc filter add dev $IF parent 30:0 prio 5 handle 3: u32 ht 2:0: divisor 256 tc filter add dev $IF parent 30:0 prio 5 u32 ht 3:6: match ip dst 192.168.0.6 flowid 30:6 tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \match ip dst 192.168.0.0/24 hashkey mask 0x0000ff00 at 12 link 2: tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \ match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:Doesn't work. Traffic never goes to class 30:6 but stays unclassified. Any suggestions?
Quoted 5 lines
Because traffic goes to 2:X filters.
PutQuoted 2 lines
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:before the 2: test.
Doesn't work anyway.
Now the config looks like the follwing:
tc filter add dev $IF parent 30:0 prio 5 protocol ip u32
tc filter add dev $IF parent 30:0 prio 5 handle 2: protocol ip u32 divisor 256 tc filter add dev $IF parent 30:0 prio 5 handle 3: protocol ip u32 ht 2:0: divisor 256 tc filter add dev $IF parent 30:0 prio 5 u32 ht 3:6: match ip dst 192.168.0.6 flowid 30:6
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x000000ff at 12 link 3:
tc filter add dev $IF protocol ip parent 30:0 prio 5 u32 ht 800:: \
match ip dst 192.168.0.0/24 hashkey mask 0x0000ff00 at 12 link 2:Here's output of tc filter ls:
root@testcomp:~# tc filter ls dev eth0 parent 30:
filter protocol ip pref 5 u32
filter protocol ip pref 5 u32 fh 3: ht divisor 256
filter protocol ip pref 5 u32 fh 3:6:800 order 2048 key ht 3 bkt 6 flowid 30:6
match c0a80006/ffffffff at 16
filter protocol ip pref 5 u32 fh 2: ht divisor 256
filter protocol ip pref 5 u32 fh 800: ht divisor 1
filter protocol ip pref 5 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 3:
match c0a80000/ffffff00 at 16
hash mask 000000ff at 12
filter protocol ip pref 5 u32 fh 800::801 order 2049 key ht 800 bkt 0 link 2:
match c0a80000/ffffff00 at 16
hash mask 0000ff00 at 12Moreover, if I try to add the 2nd nested table like this:
tc filter add dev $IF parent 30:0 prio 5 handle 3: protocol ip u32 ht 2:1: \
divisor 256
tc filter add dev $IF parent 30:0 prio 5 u32 ht 3:6: \
match ip dst 192.168.1.6 flowid 30:15I receive:
RTNETLINK answers: File exists
I would expect that nested tables have a separate handles namespace, but apparently they're not unless I'm missing something. So the question remains - has anybody managed to configure nested hashing filters for large number of addresses?
Any ideas?
Thanks.
Michael
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/