cbq vs htb?
Hello,
Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications?
from htb home> Both CBQ and HTB help you to control the use of the
outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of traffic on different simulated links. In both cases, you have to specify how to divide the physical link into simulated links and how to decide which simulated link to use for a given
packet to be sent. http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
Thanks for any insight,
Torsten
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 14 lines · Hans T
Hello,
Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications?
from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of traffic on different simulated links. In both cases, you have to specify how to divide the physical link into simulated links and how to decide which simulated link to use for a given packet to be sent.
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
Quoted 1 line
Thanks for any insight,
- Cbq uses the physical link situation to caculate the rate. Example : if you want to send 1mbit on a 10mbit you need an idle time of 90% on the link. This can be a problem if you want to shape on ppp connection that can have a different link bandwidth.
- Htb is better documented (at least I have a better understanding of htb).
- Htb is active maintained.
- Cbq has some obscure options. And it's not always clear what they do.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
What I have told you, about the problem of ping delay with CBQ, is just with RF Conection..
Bye
Roberto.
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Griem, Hans T" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, May 15, 2003 6:26 PM
Subject: Re: [LARTC] cbq vs htb?
Quoted 4 lines · Hans T
Quoted 3 lines
Hello Cef or...,
Thanks for your input. Yes I am trying to figure out where/what/when
these
Quoted 1 line
Quoted 1 line
obscure CBQ options add value (ie., to conclude whether I should
eliminate
Quoted 1 line
Quoted 1 line
cbq from my "toolchest"). So I wonder since cbq uses the physical link
per
Quoted 3 lines
Quoted 2 lines
your response is it better suited to bandwidth control for (rf) applications with fluctuating link rates, etc?
In contrary. The bandwidth option in cbq should match the real physical
link
Quoted 2 lines
bandwidth. I don't know how this is done on rf networks. Comared this to htb. Htb uses a token bucket system to control the rate
of
Quoted 1 line
the data. This has nothing to do with the physical link. It just send
data
Quoted 8 lines
at a certain controlled rate.
I'm not a specialist in this. But I don't think I'm telling any lies :)
Stef
--
Quoted 10 lines
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Cef or...,
Thanks for your input. Yes I am trying to figure out where/what/when these obscure CBQ options add value (ie., to conclude whether I should eliminate cbq from my "toolchest"). So I wonder since cbq uses the physical link per your response is it better suited to bandwidth control for (rf) applications with fluctuating link rates, etc?
Torsten
-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Thursday, May 15, 2003 10:00 AM
To: Griem, Hans T; [email protected]
Subject: Re: [LARTC] cbq vs htb?
Quoted 14 lines · Hans T
Hello,
Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications?
from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of traffic on different simulated links. In both cases, you have to specify how to divide the physical link into simulated links and how to decide which simulated link to use for a given packet to be sent.
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
Quoted 1 line
Thanks for any insight,
- Cbq uses the physical link situation to caculate the rate. Example : if you want to send 1mbit on a 10mbit you need an idle time of 90% on the link. This can be a problem if you want to shape on ppp connection that can have a different link bandwidth.
- Htb is better documented (at least I have a better understanding of htb).
- Htb is active maintained.
- Cbq has some obscure options. And it's not always clear what they do.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Hans T
Hello Cef or...,
Thanks for your input. Yes I am trying to figure out where/what/when these obscure CBQ options add value (ie., to conclude whether I should eliminate cbq from my "toolchest"). So I wonder since cbq uses the physical link per your response is it better suited to bandwidth control for (rf) applications with fluctuating link rates, etc?
In contrary. The bandwidth option in cbq should match the real physical link bandwidth. I don't know how this is done on rf networks.
Comared this to htb. Htb uses a token bucket system to control the rate of the data. This has nothing to do with the physical link. It just send data at a certain controlled rate.
I'm not a specialist in this. But I don't think I'm telling any lies :)
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Intercom - Roberto Ravetti
What I have told you, about the problem of ping delay with CBQ, is just with RF Conection..
I don't know how a RF connections is physical seen by the kernel. Htb does not care about the physical link so maybe better suited to shape on a RF connection.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/