Problem with tc class change
I am facing a peculiar problem when using "tc class change" command.
Whenever i use this command for a htb class which is also acting as parent to some other class, my system becomes unstable and hangs if i issue the command after doing the change with tc class change
# tc qdisc show
I am using Htb3.6 with kernel 2.4.19 and latest tc included with htb 3.6
What i am doing is this :
tc class add dev eth0 parent 1:2 classid 1:13 htb rate 128Kbit ceil 256Kbit prio 1
This class is acting as parent to 3 other classes. Everthing works fine till i issue the following command :
tc class change dev eth0 parent 1:2 classid 1:13 htb rate 128Kbit ceil 256Kbit prio 1
If i issue the command "# tc qdisc show" after this , system hangs immediately.
Regards
Deepak Singhal
Signature · 7 lines
__________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/