Still with HTB..
I forward this to the list also,
I attached SFQ leaf to parent class, and add QUANTUM value and PERTURB value.
It worked! i tried 20hosts borrowing from the same parent, no problem. Each host get its own allocated bandwidth.
Btw about last email sent to this list asking about QoS, i ve read LARTC document but i cant find the solution matches my case. Need help..
I have 100Kbit allocated to parent class, with 20hosts as the children. i want each one single tcp stream only able to consume 10Kbit, no more higher than that, except he or she use Download Manager like DAP or FlashGet that able to open about 10tcp streams to same host.
I need solution how to do this with tc.
Regards,
Rio Martin.
Original Message:
-----------------
From: Stef Coene [email protected]
Quoted 4 lines
I did some modification, if you run HTB in 4 or more host competing in one parent, you should modify the quantum to get fair shaping and correct rate.. And this is worked! 20 host borrow from the same parents in correct rate..
Can you specify how you changed the quantum to get it working? Or you can send me your script so I can see how it works.
Stef
Signature · 16 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi there, i have the same problem, so i am working in a script to create a class for each user, using filters based on src and dst ips so each class will borrow depending on the amount of tcp flows.
My system collapses because of kazaa opening millions and millions of tcp flows at once makes my system collapse. I use pfifo for interactive flow and sfq for non-interactive.
If i get it to work, i will let you know
_________________________________________________________________
Charla con tus amigos en línea mediante MSN Messenger:
http://messenger.yupimsn.com/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Kazaa, DAP, FlashGet, or anything that can consume high bandwidth welcome. I am not affraid anymore my clients open any program like that. With HTB qdisc every host get its allocated bandwidth fairly.
The key is in SFQ leaf, with QUANTUM and PERTURB value that you must set correctly according to your needs.
I am not so sure if you should create each host in one single class. I want to try my 20hosts in one single class as parent with SFQ leaf. I'll let you all in this list know as soon as i ve succeed.
Regards,
Rio Martin.
Original Message:
-----------------
From: GoMi . [email protected]
Quoted 5 lines
Hi there, i have the same problem, so i am working in a script to create a class for each user, using filters based on src and dst ips so each class will borrow depending on the amount of tcp flows.
My system collapses because of kazaa opening millions and millions of tcp flows at once makes my system collapse. I use pfifo for interactive flow
and
Quoted 2 lines
sfq for non-interactive.
If i get it to work, i will let you know
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/