Skip to contentSkip to conversation

4 Users no Bandwidth Borrowing

LARTC Osgaldo Suanzes 2 participants 2 messages May 21, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

How can I assign 4 users bandwidth, and not allow them to borrow
bandwidth to others when someone is not using it?

As you see below I tried to assign each class the same ceil like its
rate,
It didnt worked. but Im not sure if this is the way to go..... Maybe I
did something wrong any ideas?

#tc qdisc del dev eth1 root

#tc qdisc add dev eth1 root handle 1: htb

#tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps

#tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbps ceil 15kbps #tc class add dev eth1 parent 1:1 classid 1:11 htb rate 25kbps ceil 25kbps #tc class add dev eth1 parent 1:1 classid 1:12 htb rate 10ps ceil 10ps #tc class add dev eth1 parent 1:1 classid 1:13 htb rate 50kbps ceil 50kbps

#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.2 flowid 1:10
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.3 flowid 1:11
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.4 flowid 1:12
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.5 flowid 1:13

Regards Osgaldo.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 12 lines · Osgaldo Suanzes

Hi,

How can I assign 4 users bandwidth, and not allow them to borrow
bandwidth to others when someone is not using it?

As you see below I tried to assign each class the same ceil like its
rate,
It didnt worked. but Im not sure if this is the way to go..... Maybe
I did something wrong any ideas?

#tc qdisc del dev eth1 root

Quoted 7 lines

#tc qdisc add dev eth1 root handle 1: htb

#tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps

#tc class add dev eth1 parent 1:1 classid 1:10 htb rate 15kbps ceil 15kbps #tc class add dev eth1 parent 1:1 classid 1:11 htb rate 25kbps ceil 25kbps #tc class add dev eth1 parent 1:1 classid 1:12 htb rate 10ps ceil 10ps

What's "ps" ? Shouldn't that be kbps ?

Quoted 10 lines

#tc class add dev eth1 parent 1:1 classid 1:13 htb rate 50kbps ceil 50kbps

#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.2 flowid 1:10
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.3 flowid 1:11
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.4 flowid 1:12
#tc filter add dev eth1 protocol ip parent 1:1 prio 1 u32 match ip src 10.3.0.5 flowid 1:13

We need some more information. Is this on a natting firewall? And is eth1 connected to that LAN or the internet? And I suppose 10.3.0.2 is an internal ip-address?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/