setting promisc with iproute2
What's the equivalent of ifconfig eth0 promisc
using the ip command. The documentation says
that promisc is an obsolete flag?
thanks,
Pádraig.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Helo Pádraig,
: What's the equivalent of ifconfig eth0 promisc : using the ip command. The documentation says : that promisc is an obsolete flag?
I have been able to use the following command to alter device flags.
ip link set dev eth0 promisc on
See:
http://linux-ip.net/html/tools-ip-link.html#tools-ip-link-set
Perhaps somebody with deeper kernel knowledge can explain the comment about the obsolescence of the promisc (and allmulti) flags. (I use the word obsolescence instead of obsolete because I'm still able to use these flags on my recent 2.4 kernels.) I, too, have wondered about this note.
See the bottom of this page from the ip-cref manual for reference.
http://linux-ip.net/gl/ip-cref/node10.html
Can anybody provide some clarification of this cautionary note?
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Martin A. Brown
Helo Pádraig,
: What's the equivalent of
ifconfig eth0 promisc: using the ip command. The documentation says : that promisc is an obsolete flag?
Quoted 7 lines
I have been able to use the following command to alter device flags.
ip link set dev eth0 promisc on
See:
http://linux-ip.net/html/tools-ip-link.html#tools-ip-link-set
Hmm I tried that previously to no avail. Ah ha! tried it on rh7.3 and it worked, because they applied a patch which you can see in the iproute srpm.
cheers,
Pádraig.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/