Skip to contentSkip to conversation

teql & wireless links

LARTC Christian Zoffoli 1 participant 2 messages May 26, 2003 – May 27, 2003

lore
Share & tools
lore
#0 lore raw

Hi to all.
I'm working on a configuration that "aggregates" two wireless links using the teql schedulera and I have done a setup similar to the one proposed in the LARTC Howto.

Testing the two channels without teql (netperf) I can see a 5Mbit/s transfer on each link. Adding tesql I can see "only" a 7,2Mbit/s bandwidth on the aggregated channel.

Any suggestion?

Thanks,
Christian

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Christian Zoffoli

Hi to all.
I'm working on a configuration that "aggregates" two wireless links using the teql schedulera and I have done a setup similar to the one proposed in the LARTC Howto.

Testing the two channels without teql (netperf) I can see a 5Mbit/s transfer on each link. Adding tesql I can see "only" a 7,2Mbit/s bandwidth on the aggregated channel.

I have found similar results using equalise patch and iproute to set multipath routing.

What could be wrong?

Regards,
Christian

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/