Tc complaining about htp
Dears
I got
# tc qdisc add dev eth0 root handle 1: htb default FFFF r2q 1 Unknown qdisc "htb", hence option "default" is unparsable
"grep"ing the kernel map file System.map I can see the htb routines since I compile HTP support hard-wired.
# grep htb /boot/System.map c01daa10 T htb_hash c01daa30 T htb_find c01daa80 T htb_classify c01dabb0 T htb_debug_dump c01daee0 T htb_add_to_id_tree ...
I am using:
Slackware 9.0 w/ kernel 2.4.20
iproute2-2.4.7-now-ss020116-try
[*] QoS and/or fair queueing
<*> CBQ packet scheduler
<*> HTB packet scheduler
<*> SFQ queue
[*] QoS support
[*] Rate estimator
...Is there any other option I must set to make it work?
Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
(012) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 23 lines · Ethy H. Brito
Dears
I got
# tc qdisc add dev eth0 root handle 1: htb default FFFF r2q 1 Unknown qdisc "htb", hence option "default" is unparsable"grep"ing the kernel map file System.map I can see the htb routines since I compile HTP support hard-wired.
# grep htb /boot/System.map c01daa10 T htb_hash c01daa30 T htb_find c01daa80 T htb_classify c01dabb0 T htb_debug_dump c01daee0 T htb_add_to_id_tree ...I am using:
Slackware 9.0 w/ kernel 2.4.20
iproute2-2.4.7-now-ss020116-try[*] QoS and/or fair queueing
Quoted 8 lines
<*> CBQ packet scheduler <*> HTB packet scheduler <*> SFQ queue [*] QoS support [*] Rate estimator ...Is there any other option I must set to make it work?
No, but you need a tc binary with htb support. You can download the needed patch from the htb homepage.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Ethy,
: # tc qdisc add dev eth0 root handle 1: htb default FFFF r2q 1 : Unknown qdisc "htb", hence option "default" is unparsable
Are you using a tc with support for HTB? If not, get a binary here:
http://www.docum.org/stef.coene/qos/download/
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Stef Coene
Quoted 2 lines · Ethy H. Brito
Is there any other option I must set to make it work?
No, but you need a tc binary with htb support. You can download the needed patch from the htb homepage.
A little bit better but still doen't work:
# /sbin/tc qdisc add dev eth0 root handle 1: htb default FFFF r2q 1 RTNETLINK answers: Invalid argument
What now??
Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
(012) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Ethy H. Brito
Quoted 5 lines · Stef Coene
Quoted 1 line · Ethy H. Brito
Is there any other option I must set to make it work?
No, but you need a tc binary with htb support. You can download the needed patch from the htb homepage.
A little bit better but still doen't work:
# /sbin/tc qdisc add dev eth0 root handle 1: htb default FFFF r2q 1 RTNETLINK answers: Invalid argument
Remove default FFFF
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/