Skip to contentSkip to conversation

how to emulate large IP routing table

LARTC yuxiao jia 2 participants 4 messages Jun 15, 2003 – Jun 17, 2003

lore
Share & tools
lore

yuxiao jia

author
#0 lore raw

Hi all

I am conducting the experiments comparing IP router forwarding delay and MPLS LSR forwarding delay, it is obvious in theory MPLS in Core should be faster than IP, but for small netork (only have several core routers), result show it is not, this is why I want emulate a large IP routing table in one core router.

can I do it and how ? right now I use static routing table (by using command : ip route add network/mask via gateway)

thanks anyway

yuxiao
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Sunday, June 15, 2003 2:15 PM
Subject: LARTC digest, Vol 1 #1225 - 6 msgs

Quoted 11 lines

Send LARTC mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.ds9a.nl/mailman/listinfo/lartc
or, via email, send a message with subject or body 'help' to [email protected]

You can reach the person managing the list at
[email protected]

Quoted 7 lines

When replying, please edit your Subject line so it is more specific than "Re: Contents of LARTC digest..."

Today's Topics:

1. Re: Low latency on large uploads - almost done but not quite. (Stef

Coene)

Quoted 1 line

2. Re: Low latency on large uploads - almost done but not quite. (Thilo

Schulz)

Quoted 2 lines

3. herz the script that i have done. (Trevor Warren)
4. Re: Low latency on large uploads - almost done but not quite. (Stef

Coene)

Quoted 10 lines

5. Re: herz the script that i have done. (Stef Coene)
6. Re: htb problem (Stef Coene)

--__--__--

Message: 1
From: Stef Coene <[email protected]>
Organization: None
To: [email protected], [email protected]
Subject: Re: [LARTC] Low latency on large uploads - almost done but not

quite.

Quoted 17 lines

Date: Sun, 15 Jun 2003 11:09:09 +0200

Quoted 1 line

Here's still my script, if you are interested to look at it.

I'm interested and I have some remarks.

Quoted 12 lines

#!/bin/bash

DEV=ppp0

# delete any qdiscs or rule sets created so far.
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
# tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null
# create the root qdisc
tc qdisc add dev $DEV root handle 1: htb default 13
# install a root class, so that other clients can borrow from each

other.

Quoted 4 lines
Quoted 4 lines

tc class add dev $DEV parent 1: classid 1:1 htb rate 15kbps ceil 15kbps

# now install 4 sub classes for different priorities
# highest priority for low latency games like quake3 and ssh / ftp

control.

Quoted 1 line
Quoted 1 line

tc class add dev $DEV parent 1:1 classid 1:10 htb rate 7kbps ceil 15kbps

\

Quoted 2 lines
Quoted 2 lines

prio 0 burst 20000b cburst 22000b

# not as high but still high priority for ACK's - useful for keeping

large

Quoted 4 lines
Quoted 4 lines

# d/l's alive :)
tc class add dev $DEV parent 1:1 classid 1:11 htb rate 7kbps ceil 15kbps prio 1 burst 200b cburst 200b

# very few data allowed for HTTP requests, but still higher priority

than

Quoted 7 lines
Quoted 6 lines

bulk uploads.
tc class add dev $DEV parent 1:1 classid 1:12 htb rate 2kbps ceil 15kbps prio 10 burst 1b cburst 1b

# bulk uploads have no prio :D
tc class add dev $DEV parent 1:1 classid 1:13 htb rate 1bps ceil 15kbps
prio 20 burst 1b cburst 1b

Your burst is too low. I understand you want a minimum burst, but you

have to

Quoted 1 line

follow some rules. The best you can do is to remove the burst/cburst

option

Quoted 5 lines

so htb can calculate the minimum burst/cburst for you.
And don't you get quantum errors in your kernel log? That's because your quantum is too low for the classes. There is a long explanation for this, see www.docum.org on the faq page.
You also use different prio's. This can be ok in most cases, except if

you

Quoted 1 line

have a low prio class that's sending more data then the configured rate.

If

Quoted 2 lines

you do so, the latency can go up for that class. I (still) didn't test it myself, but you can find prove of it on the htb homepage. The solution

for

Quoted 14 lines

this is to make sure you never put too much traffic in a low prio class.

Quoted 4 lines
# now make all qdiscs simple pfifo
# small queues for minimum latency
tc qdisc add dev $DEV parent 1:10 handle 20: pfifo limit 0
tc qdisc add dev $DEV parent 1:11 handle 30: pfifo limit 0

Are you sure limit 0 is possible ????

Quoted 6 lines
# larger queues for more latency.
tc qdisc add dev $DEV parent 1:12 handle 40: pfifo limit 5
tc qdisc add dev $DEV parent 1:13 handle 50: pfifo limit 20

#quake3-style udp games have been marked in iptables
tc filter add dev $DEV protocol ip parent 1: prio 0 handle 1 fw flowid

1:10

Quoted 2 lines
Quoted 2 lines
# icmp to get the response times.
tc filter add dev $DEV protocol ip parent 1: prio 1 u32 match ip

protocol 1

Quoted 3 lines
Quoted 3 lines

0xff flowid 1:10

# ssh - not scp! scp is seperated by the TOS bits from ssh
tc filter add dev $DEV protocol ip parent 1: prio 2 u32 match ip dport

22

Quoted 3 lines
Quoted 3 lines

0xffff match ip tos 0x10 0xff flowid 1:10

# ftp
tc filter add dev $DEV protocol ip parent 1: prio 3 u32 match ip dport

21

Quoted 3 lines
Quoted 3 lines

0xffff match ip tos 0x10 0xff flowid 1:10
# ACK packets ..
tc filter add dev $DEV protocol ip parent 1: prio 4 u32 match ip

protocol 6

Quoted 4 lines
Quoted 4 lines

0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 1:11
# HTTP requests
tc filter add dev $DEV protocol ip parent 1: prio 10 u32 match ip dport

80

Quoted 12 lines
Quoted 1 line

0xffff flowid 1:12

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

Quoted 7 lines

--__--__--

Message: 2
From: Thilo Schulz <[email protected]>
Reply-To: [email protected]
To: [email protected]
Subject: Re: [LARTC] Low latency on large uploads - almost done but not

quite.

Quoted 10 lines

Date: Sun, 15 Jun 2003 13:44:10 +0200

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 4 lines · you
Quoted 1 line

Here's still my script, if you are interested to look at it.

I'm interested and I have some remarks.

Your burst is too low. I understand you want a minimum burst, but you

ha> ve

Quoted 6 lines
Quoted 2 lines

to follow some rules. The best you can do is to remove the burst/cburst option so htb can calculate the minimum burst/cburst for you.

yes, sounds reasonable now that I spend a second thought about it.

Quoted 1 line

And don't you get quantum errors in your kernel log? That's because

your

Quoted 1 line
Quoted 1 line

quantum is too low for the classes. There is a long explanation for

this,

Quoted 5 lines
Quoted 1 line

see www.docum.org on the faq page.

hmm .. quantum? I have never set quantum with any parameter, or have I?

Quoted 1 line

You also use different prio's. This can be ok in most cases, except if

y> ou

Quoted 1 line
Quoted 1 line

have a low prio class that's sending more data then the configured

rate.>

Quoted 1 line
Quoted 1 line

If you do so, the latency can go up for that class. I (still) didn't

test

Quoted 1 line
Quoted 1 line

it myself, but you can find prove of it on the htb homepage. The

solution

Quoted 4 lines
Quoted 2 lines

for this is to make sure you never put too much traffic in a low prio class.

I have given plenty of bandwidth to the 1:10 class. Quake3 streams are

max.>

Quoted 63 lines

1500 bytes/s. And ssh does not use that much either.

Quoted 6 lines
Quoted 4 lines
# now make all qdiscs simple pfifo
# small queues for minimum latency
tc qdisc add dev $DEV parent 1:10 handle 20: pfifo limit 0
tc qdisc add dev $DEV parent 1:11 handle 30: pfifo limit 0

Are you sure limit 0 is possible ????

Yes, at least the status command showed me, that the limit was set to 0.

- Thilo Schulz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE+7FwPZx4hBtWQhl4RAn8XAKDSJR6E7w3Q6I0ki4bVpDGfH//anwCfestd aj5fVwoC9ANATJ1CA50N5P4=
=9XOi
-----END PGP SIGNATURE-----

--__--__--

Message: 3
From: Trevor Warren <[email protected]>
To: lartc <[email protected]>
Cc: Stef Coene <[email protected]>, Trevor Warren <[email protected]>
Organization: Red Hat India
Date: 15 Jun 2003 05:16:31 +0530
Subject: [LARTC] herz the script that i have done.

This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages.

--=_jive-4095-1055677798-0001-2
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit

Hello there,

Having made quite a lot of expensive mistakes i have finally clobbered
together a script for the users on my network.

Have a look at it and please suggest as to how can i limit bandwidth to
each ip on this network to about 64Kbits.

Trevor

--
( >- GNU/LINUX, It's all about CHOICE -< )
/~\ __ [email protected] __ /~\

|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

--=_jive-4095-1055677798-0001-2
Content-Type: text/x-sh; name="final.sh"; charset=utf-8
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=final.sh

Quoted 8 lines

#!/bin/bash

#####################################
#Deleting and setting up
#Root qdisc's
#####################################
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 1Mbit avpkt 1000 cell

8

Quoted 9 lines

#######################################
#Setting up top 2 qdiscs
#for initial packet classification
#######################################
# Exatt Rules
#######################################

tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 1Mbit rate

800kbit weight 80kbit allot 1514 cell 8 maxburst 20 avpkt 1000 isolated

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.10.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.10.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.11.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.11.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.12.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.12.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.13.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.13.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.14.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.14.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.15.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.15.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.16.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.16.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.17.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.17.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.18.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.18.0/24 classid 1:1

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.19.0/24 classid 1:1

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.19.0/24 classid 1:1

Quoted 6 lines

##########################################
#Paradyne Rules
##########################################
tc class add dev eth0 parent 1:0 classid 1:2 cbq bandwidth 1Mbit rate

200kbit weight 20kbit allot 1514 cell 8 maxburst 20 avpkt 1000 bounded

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.20.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.20.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.21.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.21.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.22.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.22.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.23.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.23.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.24.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.24.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.25.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.25.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.26.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.26.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.27.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.27.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.28.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.28.0/24 classid 1:2

Quoted 2 lines

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src

192.168.29.0/24 classid 1:2

Quoted 1 line

tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst

192.168.29.0/24 classid 1:2

Quoted 8 lines

#######################################
#Setting up top 10 qdiscs
#for initial Exatt packet classification
#######################################
tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.10.0/24 classid 1:3

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.10.0/24 classid 1:3

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.11.0/24 classid 1:4

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.11.0/24 classid 1:4

Quoted 1 line

tc class add dev eth0 parent 1:1 classid 1:5 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.12.0/24 classid 1:5

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.12.0/24 classid 1:5

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:6 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.13.0/24 classid 1:6

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.13.0/24 classid 1:6

Quoted 3 lines

tc class add dev eth0 parent 1:1 classid 1:7 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.14.0/24 classid 1:7

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.14.0/24 classid 1:7

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:8 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.15.0/24 classid 1:8

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.15.0/24 classid 1:8

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:9 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.16.0/24 classid 1:9

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.16.0/24 classid 1:9

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:10 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.17.0/24 classid 1:10

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.17.0/24 classid 1:10

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:11 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.18.0/24 classid 1:11

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.18.0/24 classid 1:11

Quoted 2 lines

tc class add dev eth0 parent 1:1 classid 1:12 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded isolated

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip src

192.168.19.0/24 classid 1:12

Quoted 1 line

tc filter add dev eth0 parent 1:1 protocol ip u32 match ip dst

192.168.19.0/24 classid 1:12

Quoted 7 lines

######################################
#Setting up top 10 qdiscs
#for initial Paradyne packet classification
#######################################
tc class add dev eth0 parent 1:2 classid 1:13 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.20.0/24 classid 1:13

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.20.0/24 classid 1:13

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:14 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.21.0/24 classid 1:14

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.21.0/24 classid 1:14

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:15 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.22.0/24 classid 1:15

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.22.0/24 classid 1:15

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:16 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.23.0/24 classid 1:16

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.23.0/24 classid 1:16

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:17 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.24.0/24 classid 1:17

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.24.0/24 classid 1:17

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:18 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.25.0/24 classid 1:18

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.25.0/24 classid 1:18

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:19 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.26.0/24 classid 1:19

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.26.0/24 classid 1:19

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:20 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.27.0/24 classid 1:20

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.27.0/24 classid 1:20

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:21 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.28.0/24 classid 1:21

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.28.0/24 classid 1:21

Quoted 2 lines

tc class add dev eth0 parent 1:2 classid 1:22 cbq bandwidth 1Mbit rate

80Kbit allot 1514 cell 8 maxburst 20 avpkt 1000 weight 8Kbit bounded

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip src

192.168.29.0/24 classid 1:22

Quoted 1 line

tc filter add dev eth0 parent 1:2 protocol ip u32 match ip dst

192.168.29.0/24 classid 1:22

Quoted 10 lines

#################################
# Start of Actual Filters
#################################

--=_jive-4095-1055677798-0001-2--

Quoted 7 lines

--__--__--

Message: 4
From: Stef Coene <[email protected]>
Organization: None
To: [email protected], [email protected]
Subject: Re: [LARTC] Low latency on large uploads - almost done but not

quite.

Quoted 16 lines

Date: Sun, 15 Jun 2003 14:00:10 +0200

Quoted 13 lines · Thilo Schulz
Quoted 8 lines · you
Quoted 1 line

Here's still my script, if you are interested to look at it.

I'm interested and I have some remarks.

Your burst is too low. I understand you want a minimum burst, but you have to follow some rules. The best you can do is to remove the burst/cburst option so htb can calculate the minimum burst/cburst for you.

yes, sounds reasonable now that I spend a second thought about it.

Quoted 1 line

And don't you get quantum errors in your kernel log? That's because

your

Quoted 5 lines
Quoted 4 lines
Quoted 2 lines

quantum is too low for the classes. There is a long explanation for this, see www.docum.org on the faq page.

hmm .. quantum? I have never set quantum with any parameter, or have I?

No. Quantum is used for leaf classes to determine the amount of packets

they

Quoted 1 line

can send. It's calculates as rate / r2q. And r2q is 10 by default. You

can

Quoted 1 line

overrule r2q if you add the htb qdisc and you can overrule quantum if you

add

Quoted 3 lines

a htb class. Quantum must be > 1500 (the size of 1 packet) and < 60000.

Quoted 1 line
Quoted 1 line

You also use different prio's. This can be ok in most cases, except

if

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

you have a low prio class that's sending more data then the configured rate. If you do so, the latency can go up for that class. I (still) didn't test it myself, but you can find prove of it on the htb

homepage.

Quoted 1 line
Quoted 1 line
Quoted 1 line

The solution for this is to make sure you never put too much traffic

in a

Quoted 3 lines
Quoted 3 lines
Quoted 1 line

low prio class.

I have given plenty of bandwidth to the 1:10 class. Quake3 streams are

max.

Quoted 2 lines
Quoted 1 line

1500 bytes/s. And ssh does not use that much either.

Ok. As long as you are aware of the problem. You can also try to limit

the

Quoted 35 lines

amount of packets the filters with a policer. So there are never too much packets in a class.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
# now make all qdiscs simple pfifo
# small queues for minimum latency
tc qdisc add dev $DEV parent 1:10 handle 20: pfifo limit 0
tc qdisc add dev $DEV parent 1:11 handle 30: pfifo limit 0

Are you sure limit 0 is possible ????

Yes, at least the status command showed me, that the limit was set to 0.

Ok.

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

--__--__--

Message: 5
From: Stef Coene <[email protected]>
Organization: None
To: Trevor Warren <[email protected]>, lartc <[email protected]>
Subject: Re: [LARTC] herz the script that i have done.
Date: Sun, 15 Jun 2003 19:56:15 +0200
Cc: Trevor Warren <[email protected]>

On Sunday 15 June 2003 01:46, Trevor Warren wrote:

Quoted 8 lines
Quoted 7 lines

Hello there,

Having made quite a lot of expensive mistakes i have finally clobbered
together a script for the users on my network.

Have a look at it and please suggest as to how can i limit bandwidth to
each ip on this network to about 64Kbits.

You specify bandwidth 1mbit. But that should be your real nic bandwidth.

So

Quoted 1 line

10mbit or 100mbit. If you want to share the same 1Mbit between some

classes,

Quoted 1 line

you have to add 1 bounded class with rate = 1mbit to the root qdisc and

add

Quoted 2 lines

the other classes to that class.
Remove the isolated class, it's not working and can even distubr your

setup.

Quoted 13 lines

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

--__--__--

Quoted 12 lines

Message: 6
From: Stef Coene <[email protected]>
Organization: None
To: [email protected], [email protected]
Subject: Re: [LARTC] htb problem
Date: Sun, 15 Jun 2003 20:14:52 +0200

Quoted 4 lines · On Saturday 14 June 2003 23:46, [email protected] wrote:

Hey I hve the same problem. My packets are marked, my classes are OK my filters are set OK
and all packets are passing through the root class!!
I think that this is a big problem. A know 1 more person that has the

same

Quoted 2 lines
Quoted 1 line

problem!

Ok. I don't understand. I do all my test using iptables and fw filter.

This

Quoted 5 lines

works for me :
tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:100 iptables -A OUTPUT -t mangle -p tcp --dport 2000 -j MARK --set-mark 1

This is on a simple pc. No router, no bridge, no firewall. It's only

used to

Quoted 15 lines

shape outgoing locally bandwidth.

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

--__--__--

Quoted 7 lines

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

--- yuxiao jia <[email protected]> wrote: > Hi
all

Quoted 11 lines

I am conducting the experiments comparing IP router forwarding delay and
MPLS LSR forwarding delay, it is obvious in theory MPLS in Core should be
faster than IP, but for small netork (only have several core routers),
result show it is not, this is why I want emulate a large IP routing table
in one core router.

Quoted 3 lines

can I do it and how ? right now I use static routing table (by using command
: ip route add network/mask via gateway)

Simple soultions would be write a script that expands lange ranges of IP address and pumps into the routing table.

Quoted 4 lines

thanks anyway

yuxiao

__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#2 lore raw
In reply to yuxiao jia

Hi,

can you give me a example of this kind of script. Does it relate with routing protocol (OSPF..)?

thanks

yuxiao

Quoted 39 lines

Message: 2
Date: Mon, 16 Jun 2003 05:35:37 +0100 (BST)
From: =?iso-8859-1?q?deepak patwardhan?= <[email protected]>
Subject: Re: [LARTC] how to emulate large IP routing table
To: [email protected]

--- yuxiao jia <[email protected]> wrote: > Hi
all

Quoted 11 lines

I am conducting the experiments comparing IP router forwarding delay and
MPLS LSR forwarding delay, it is obvious in theory MPLS in Core should be
faster than IP, but for small netork (only have several core routers),
result show it is not, this is why I want emulate a large IP routing table
in one core router.

Quoted 3 lines

can I do it and how ? right now I use static routing table (by using command
: ip route add network/mask via gateway)

Simple soultions would be write a script that expands lange ranges of IP address and pumps into the routing table.

Quoted 4 lines

thanks anyway

yuxiao

__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html

--__--__--

Quoted 7 lines

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#3 lore raw
In reply to yuxiao jia

----- Original Message -----
From: "deepak patwardhan" <[email protected]>
To: "yuxiao jia" <[email protected]>
Sent: Tuesday, June 17, 2003 8:26 AM
Subject: Re: [LARTC] how to emulate large IP routing table

Quoted 97 lines

--- yuxiao jia <[email protected]> wrote: > Hi,

Quoted 4 lines

can you give me a example of this kind of script.
Does it relate with
routing protocol (OSPF..)?

hmm.... I guess it relates to all. If you are using Gated or Zebra or cisco, juniper ... you can use redistribute route technique to pump in routes. But again there they don't have facilities to redistribute ranges of routes.

for eg.
<some command> 192.168.1.0/24 to 192.169.1.0/24 gateway a.b.c.d.

So one needs to write huge config files to put in large state routes and redistribute them into the required protocols.

Quoted 1 line
Quoted 1 line
Quoted 1 line

: ip route add network/mask via gateway)

If you can wrap it in a script, which takes start IPaddr, End IPaddr and networkmask (comman mask to keep things simple) you can use the script to pump in large routes.

The script would have a for loop kinda algorithm Step 1. begin with the start IP/Mask,
Step 2. add route
Step 3. increment Ip, go to step4 untill you reach endIP.

Once you have routes in kernel RT, try redistributing them from there to any protocol of your choice.

Am speaking very conceptual .... Hope you get my point. I haven't come across a readily available admin option to pump in large routes.

-Deepak

Quoted 57 lines

thanks

yuxiao

Quoted 4 lines

Message: 2
Date: Mon, 16 Jun 2003 05:35:37 +0100 (BST)
From: =?iso-8859-1?q?deepak patwardhan?> > <[email protected]>
Subject: Re: [LARTC] how to emulate large IP

routing table

Quoted 3 lines

To: [email protected]

--- yuxiao jia <[email protected]> wrote: >

Hi

Quoted 3 lines

all

Quoted 2 lines

I am conducting the experiments comparing IP

router

Quoted 2 lines
Quoted 2 lines

forwarding delay and
MPLS LSR forwarding delay, it is obvious in

theory

Quoted 4 lines
Quoted 4 lines

MPLS in Core should be
faster than IP, but for small netork (only have
several core routers),
result show it is not, this is why I want

emulate a

Quoted 4 lines
Quoted 4 lines

large IP routing table
in one core router.

can I do it and how ? right now I use static

routing

Quoted 2 lines
Quoted 1 line

table (by using command

Simple soultions would be write a script that

expands

Quoted 1 line

lange ranges of IP address and pumps into the

routing

Quoted 22 lines

table.

Quoted 4 lines

thanks anyway

yuxiao

__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html

--__--__--

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

Quoted 8 lines
Quoted 3 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://lartc.org/

__________________________________________________
Yahoo! Plus - For a better Internet experience
http://uk.promotions.yahoo.com/yplus/yoffer.html

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/