Skip to contentSkip to conversation

Tips & tricks regarding upload shaping

LARTC Radu-Mihail Obada 2 participants 2 messages Jun 19, 2003 – Jun 20, 2003

lore
Share & tools
lore
#0 lore raw

Hey everyone,
I think I finally figured it out what's the buzz with egress shaping, and how to shape downloads... things seems to work pretty smooth so far. But wait, there's more: now I want to shape uploads, because behind the main router, there are important web, mail, irc etc. servers but also lots of users which do massive peer-to-peer transfers, and heavy uploads seem to kill my servers responses.
So that's my set up. I have thought of a root prio qd, with a tbf qd on 1:3 (the least important band), but it seems not to work as expected. So hints/tips/tricks/suggestions/similar setups and solution are more than expected.
Thanks in advance.

-----
Radu-Mihail Obada
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · Radu-Mihail Obada

Hey everyone,
I think I finally figured it out what's the buzz with egress shaping, and how to shape downloads... things seems to work pretty smooth so far. But wait, there's more: now I want to shape uploads, because behind the

Quoted 8 lines

main router, there are important web, mail, irc etc. servers but also lots of users which do massive peer-to-peer transfers, and heavy uploads seem to kill my servers responses.
So that's my set up. I have thought of a root prio qd, with a tbf qd on 1:3 (the least important band), but it seems not to work as expected. So hints/tips/tricks/suggestions/similar setups and solution are more than expected.
Thanks in advance.

What do you mean? Post your configuration here and give us any measurements you've done...

- Giannis

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/