Skip to contentSkip to conversation

LARTC digest, Vol 1 #1236 - 16 msgs

LARTC Srikanth 1 participant 1 message Jun 21, 2003

lore
Share & tools
lore

Srikanth

author
#0 lore raw

Hi,

Quoted 11 lines

Message: 13
Date: Fri, 20 Jun 2003 15:17:33 -0300
To: [email protected]
From: Ana Carolina Alonso <[email protected]>
Subject: [LARTC] RTNETLINK answers: invalid argument

Hello, I had configure my router linux which has Suse 7.2, kernel 2.4.21. I had installed the QoS support into the kernel. When I run the comand tc to create a CBQ qdisc, this work very well, but when I run tc to create the HTB qdisc I receive next message:

Quoted 6 lines

RTNETLINK answers: Invalid argument

when my comand is:

tc qdisc add dev eth0 root handle 1:htb

Give some space between 1: & htb.
Try the below one.

tc qdisc add dev eth0 root handle 1: htb default 10

Quoted 6 lines

Thanks in advance!

cheers
-Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/