Skip to contentSkip to conversation

pfifo scheduler

LARTC Nikolay Datchev 3 participants 4 messages Jun 21, 2003

lore
Share & tools
lore
#0 lore raw

Hello ppl,

I'm playing with the pfifo scheduler, its simple, and i cannot understand what's wrong. So, i have test machine, with one interface eth0, and i want to send no more than 3 packets/sec out of that interface, so i do:

tc qdisc add dev eth0 root pfifo limit 3

And i get pfifo scheduler on eth0 with limit of 3, but it sends as many packets per second as it wants, without delay or drop. How can i get it throttle if sended more than N packets/sec ?

Thanks in advance

-- Nikolay Datchev

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 11 lines · Nikolay Datchev

Hello ppl,

I'm playing with the pfifo scheduler, its simple, and i cannot understand what's wrong. So, i have test machine, with one interface eth0, and i want to send no more than 3 packets/sec out of that interface, so i do:

tc qdisc add dev eth0 root pfifo limit 3

And i get pfifo scheduler on eth0 with limit of 3, but it sends as many packets per second as it wants, without delay or drop. How can i get it throttle if sended more than N packets/sec ?

You can't do this with the pfifo qdisc. You only create a pfifo qdisc that can hold 3 packets. But that does not mean that it will send 3 packets / seconds.
Take a look at the htb, cbq or tbf qdisc for limiting bandwidth.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Nikolay Datchev

I'm using successfully all kinds of qdiscs, but i cannot find a solution to limit number of packets in one flow. Is there a way to do this with cbq, htb or tbf ? Not bandwidth in bits per second, but packets per second.

Thanks,

-- Nikolay Datchev

Quoted 21 lines · Stef Coene
Quoted 11 lines · Nikolay Datchev

Hello ppl,

I'm playing with the pfifo scheduler, its simple, and i cannot understand what's wrong. So, i have test machine, with one interface eth0, and i want to send no more than 3 packets/sec out of that interface, so i do:

tc qdisc add dev eth0 root pfifo limit 3

And i get pfifo scheduler on eth0 with limit of 3, but it sends as many packets per second as it wants, without delay or drop. How can i get it throttle if sended more than N packets/sec ?

You can't do this with the pfifo qdisc. You only create a pfifo qdisc that can hold 3 packets. But that does not mean that it will send 3 packets / seconds.
Take a look at the htb, cbq or tbf qdisc for limiting bandwidth.

Stef

--

Quoted 9 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Nikolay Datchev
Quoted 4 lines · Nikolay Datchev

I'm using successfully all kinds of qdiscs, but i cannot find a solution to limit number of packets in one flow. Is there a way to do this with cbq, htb or tbf ? Not bandwidth in bits per second, but packets per second.

How about using netfilter with "-m limit"?

You can find about it at
http://www.netfilter.org/documentation/HOWTO/packet-filtering-HOWTO.html

Thanks,
Alberto

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/