Weird! HTB does not work with my new box..
Folks,
I tried to implemented HTB in Slackware Linux 9.0
this is what happened:
Unknown qdisc "htb", hence option "default" is unparsable **HTB: failed to set root qdisc on eth0!
root@premier:/etc/sysconfig/htb# lsmod Module Size Used by Not tainted sch_htb 21120 0 (unused) cls_route 5560 0 (unused) cls_u32 5724 0 (unused) cls_fw 3480 0 (unused) sch_sfq 3520 0 (unused)
this is weird isnt it? all modules needed for HTB exist but error message said something about unknown qdisc..
Regards,
Rio Martin.
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines
Unknown qdisc "htb", hence option "default" is unparsable **HTB: failed to set root qdisc on eth0!
root@premier:/etc/sysconfig/htb# lsmod Module Size Used by Not tainted sch_htb 21120 0 (unused) cls_route 5560 0 (unused) cls_u32 5724 0 (unused) cls_fw 3480 0 (unused) sch_sfq 3520 0 (unused)
Quoted 2 lines
this is weird isnt it? all modules needed for HTB exist but error message said something about unknown qdisc..
tc does'n know about htb, not the kernel.
Get a patch for tc to "know" about htb, or the binary from Devik page.
Quoted 6 lines
Regards,
Rio Martin.
Quoted 9 lines
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ ._______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
Catalin(ux) BOIE
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
try to change tc bin (from htb home pages).
Olivier.
-----Message d'origine-----
De : [email protected] [mailto:[email protected]]
Envoyé : mardi 24 juin 2003 11:01
À : [email protected]
Objet : [LARTC] FW: Weird! HTB does not work with my new box..
Folks,
I tried to implemented HTB in Slackware Linux 9.0
this is what happened:
Unknown qdisc "htb", hence option "default" is unparsable **HTB: failed to set root qdisc on eth0!
root@premier:/etc/sysconfig/htb# lsmod Module Size Used by Not tainted sch_htb 21120 0 (unused) cls_route 5560 0 (unused) cls_u32 5724 0 (unused) cls_fw 3480 0 (unused) sch_sfq 3520 0 (unused)
this is weird isnt it? all modules needed for HTB exist but error message said something about unknown qdisc..
Regards,
Rio Martin.
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/