1 MBS per server Linux router
Hello,
If you just wanna reduce the b/w pipe per server wrr could be a
simplistic implementation that would work.
For real functionality see htb which works like a charm. For something
more complex see cbq.
Trevor
Quoted 23 lines · Jean-Francois Levesque
Hello everyone!
I would like to do a linux router to limit the connection for some servers to 1 mbs per server.
[SERVERS] ---> [Linux "1MBS per server" router] ---> ((((Internet))))
I did some searches about routing and bandwidth on the net and the solution seems to be 'tc'. Well, 'tc' is not very easy to understand so I tried 'tcng'. I installed it and it seems to work fine (able to generate the 'tc' rules and tcsim is working).
Now, my question is what type of configuration do I need? I read some doc about tcng and I saw the "fifo", "tbf", "SLB"... I need a rate so it's not "fifo". How do I configure the others?
Thanks for your help!
Jean-Francois
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 9 lines
( >- LINUX, It's all about CHOICE -< ) /~\ __ [email protected] __ /~\ | \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Jean,
For all that i know your tcng config would be perfectly fine. I will
mail you my 4000 node config. Please try the same out and lemme know it if works for you.
Trevor
Quoted 71 lines · Jean-Francois Levesque
Hi!
I have done that script to test my router :
#include "fields.tc"
#include "ports.tc"#define INTERFACE eth0
#define LIMITEDRATE 1kBpsdev INTERFACE { egress { /* In class selection path, the filters come first! DSmark */ class ( <$AB10CL> ) if ip_dst = 10.1.1.10 || ip_src = 10.1.1.10; class ( <$AB11CL> ) if ip_dst = 10.1.1.11 || ip_src = 10.1.1.11; class ( <$AB12CL> ) if ip_dst = 10.1.1.12 || ip_src = 10.1.1.12; class ( <$other> ) if 1 ; /* section in which we configure the qdiscs and classes */ htb () { class ( rate 10kBps, ceil 10kBps ) { $AB10CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE ){ sfq; } ;
$AB11CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE )
{ sfq; } ;
$AB12CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE ){ sfq; } ; $other = class ( rate 1kBps, ceil 1kBps ) { sfq; } ; } } } }I have plugged my machine behind the router but I see no difference when I download :-(
What is wrong with that script?
If this is not working, I'll try wrr.
Thanks!
Jean-Francois
Quoted 11 lines · Trevor Warren
Hello,
If you just wanna reduce the b/w pipe per server wrr could be a simplistic implementation that would work.
For real functionality see htb which works like a charm. For something more complex see cbq.
Trevor
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 9 lines
( >- LINUX, It's all about CHOICE -< ) /~\ __ [email protected] __ /~\ | \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello everyone!
I would like to do a linux router to limit the connection for some servers to 1 mbs per server.
[SERVERS] ---> [Linux "1MBS per server" router] ---> ((((Internet))))
I did some searches about routing and bandwidth on the net and the solution seems to be 'tc'. Well, 'tc' is not very easy to understand so I tried 'tcng'. I installed it and it seems to work fine (able to generate the 'tc' rules and tcsim is working).
Now, my question is what type of configuration do I need? I read some doc about tcng and I saw the "fifo", "tbf", "SLB"... I need a rate so it's not "fifo". How do I configure the others?
Thanks for your help!
Jean-Francois
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi!
I have done that script to test my router :
#include "fields.tc"
#include "ports.tc"
#define INTERFACE eth0
#define LIMITEDRATE 1kBps
dev INTERFACE {
egress {
/* In class selection path, the filters come first! DSmark */
class ( <$AB10CL> ) if ip_dst = 10.1.1.10 || ip_src =
10.1.1.10;
class ( <$AB11CL> ) if ip_dst = 10.1.1.11 || ip_src =
10.1.1.11;
class ( <$AB12CL> ) if ip_dst = 10.1.1.12 || ip_src =
10.1.1.12;
class ( <$other> ) if 1 ;
/* section in which we configure the qdiscs and classes */
htb () {
class ( rate 10kBps, ceil 10kBps ) {
$AB10CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE ) { sfq; } ;
$AB11CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE )
{ sfq; } ;
$AB12CL = class ( rate LIMITEDRATE, ceil LIMITEDRATE )
{ sfq; } ;
$other = class ( rate 1kBps, ceil 1kBps ) { sfq; } ;
}
}
}
}I have plugged my machine behind the router but I see no difference when I download :-(
What is wrong with that script?
If this is not working, I'll try wrr.
Thanks!
Jean-Francois
Quoted 11 lines · Trevor Warren
Hello,
If you just wanna reduce the b/w pipe per server wrr could be a simplistic implementation that would work.
For real functionality see htb which works like a charm. For something more complex see cbq.
Trevor
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Trevor Warren
Hello Jean,
For all that i know your tcng config would be perfectly fine. I will mail you my 4000 node config. Please try the same out and lemme know it if works for you.
Trevor
It's not working :-( Maybe because of my iptables rules :
[root@ROUTER-1MBS root]# iptables --list -nv
Chain INPUT (policy ACCEPT 51 packets, 3356 bytes)
pkts bytes target prot opt in out source
destination
0 0 ACCEPT all -- lo * 0.0.0.0/0
0.0.0.0/0
31278 46M ACCEPT all -- eth0 * 0.0.0.0/0
0.0.0.0/0 state RELATED,ESTABLISHED
20169 1467K ACCEPT all -- eth1 * 0.0.0.0/0
0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0
0.0.0.0/0 tcp dpt:22
2 120 ACCEPT tcp -- eth1 * 0.0.0.0/0
0.0.0.0/0 tcp dpt:22
0 0 DROP tcp -- eth1 * 0.0.0.0/0
0.0.0.0/0
0 0 DROP udp -- eth1 * 0.0.0.0/0
0.0.0.0/0
9 540 DROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0
726 93117 DROP udp -- eth0 * 0.0.0.0/0
0.0.0.0/0
Chain FORWARD (policy ACCEPT 15056 packets, 5691K bytes)
pkts bytes target prot opt in out source
destination
17956 1693K ACCEPT all -- eth1 * 0.0.0.0/0
0.0.0.0/0
Chain OUTPUT (policy ACCEPT 31785 packets, 2347K bytes)
pkts bytes target prot opt in out source
destination
0 0 ACCEPT all -- * lo 0.0.0.0/0
0.0.0.0/0
[root@ROUTER-1MBS root]#
eth0 Link encap:Ethernet HWaddr 00:50:BA:87:42:8D
inet addr:192.168.0.230 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:53801 errors:0 dropped:0 overruns:0 frame:0
TX packets:35241 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:52861850 (50.4 Mb) TX bytes:3140165 (2.9 Mb)
Interrupt:9 Base address:0xb000eth1 Link encap:Ethernet HWaddr 00:E0:18:FF:6F:F4
inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38410 errors:0 dropped:0 overruns:0 frame:0
TX packets:30721 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:3724993 (3.5 Mb) TX bytes:7650950 (7.2 Mb)
Interrupt:10 Base address:0xd000eth0 is the company local network and eth1 is my local network where I have 10.1.1.12 (my PC) and 10.1.1.1 (the router).
I didn't patch the kernel, it's normal? I have RH9 with kernel "Linux ROUTER-1MBS 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux". Should I change something in kernel?
I have tried htb.init but it's not working :-(
Jean-Francois
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/