can not use htb with kernel 2.4.21
Hello,
i made a kernel 2.4.21 with HTB support directly compiled in (no module), but "grep -i htb /proc/ksysms" find's nothing.
When i try "tc qdisc add dev eth0 root handle 1: htb default 12" i get the error : RTNETLINK answers: Invalid argument
I made a second version of this kernel with all possible QoS options and queueing disciplines on/enbaled without success.
I get the same error.
My system is Debian Woody. I grabed a copy of the tc-binary from luxik.cdi.cz/~devik/ .
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_CSZ=mCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_INGRESS=yCONFIG_NET_QOS=yCONFIG_NET_ESTIMATOR=yCONFIG_NET_CLS=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_POLICE=y
Does anyone has had the same problem ?
Or does anybody know what to do now ?
regards
Joerg
Signature · 5 lines
Jörg Hartmann Tel: +49 391 40 00 125 [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · On Mon, 30 Jun 2003 10:54:14 +0200 Joerg Hartmann <[email protected]>…
Hello,
i made a kernel 2.4.21 with HTB support directly compiled in > but "grep -i htb
/proc/ksysms" find's nothing.
...
Hello,
try to compile everything in QoS subsystem as modules, it works perfectly for me.
Signature · 5 lines
Martin Volf _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/