Skip to contentSkip to conversation

Using multiple uplinks

LARTC Michel Angelo da Silva Pereira 1 participant 1 message Jul 2, 2003

lore
Share & tools
lore
#0 lore raw

Hi, I'm with a problem here on configuring our server to use multiple
uplinks with different providers.
The packet goes though on my way, but there is some lost packets that I
don't known where it's going and causing my link to goes slow and stop sending/receiving data.
Here i'm listing the route tables and the rules. It's only for 1 IP.

[root@firewall /root]# ip ro li
200.148.140.252/30 dev eth4 proto kernel scope link src 200.148.140.253 172.16.2.0/24 dev eth2 proto kernel scope link src 172.16.2.254 default via 200.148.140.254 dev eth4

[root@firewall /root]# ip ro li table 4
200.153.199.64/26 dev eth3 proto kernel scope link src 200.153.199.116 172.16.2.0/24 dev eth2 proto kernel scope link src 172.16.2.254 default via 200.153.199.65 dev eth3

[root@firewall /root]# ip rule list

0:      from all lookup local
32764:  from all fwmark        4 lookup speedy
32765:  from all lookup main
32767:  from all lookup 253

[root@firewall /root]# iptables -t mangle -L -nv Chain PREROUTING (policy ACCEPT 11M packets, 3773M bytes)
pkts bytes target prot opt in out source
destination
104 8576 MARK all -- * * 172.16.2.251
0.0.0.0/0 MARK set 0x4

[root@firewall /root]# iptables -t nat -L POSTROUTING -nv Chain POSTROUTING (policy ACCEPT 350K packets, 23M bytes)
pkts bytes target prot opt in out source
destination

     0     0 SNAT       all  --  *      eth3    0.0.0.0/0 

0.0.0.0/0 to:200.153.199.116

Thanks for the help

Signature · 7 lines
=================================Analista de Segurança
Solaris Certified System Administrator - Conectiva Linux Specialist
Mondonet Network Solutions - www.mondonet.com.br - (016) 3911-5323
=================================
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/