What happened if the parent rate lower than children ?
Dear folks,
finally i found something weird after i foolishly try to lower parent rate.
i set parent class rate and ceil to 40kbit while children rate i set to 10kbit and ceil to 100kbit
i check the statistic and i couldnt find parent details and rate, missing.. is this usual ? before i did this foolish thing, statistic for parent such as rate is exist..
Help me analyze this ..
Regards,
Rio Martin.
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · On Thursday 03 July 2003 15:27, [email protected] wrote:
Dear folks,
finally i found something weird after i foolishly try to lower parent rate.i set parent class rate and ceil to 40kbit while children rate i set to 10kbit and ceil to 100kbit
i check the statistic and i couldnt find parent details and rate, missing.. is this usual ? before i did this foolish thing, statistic for parent such as rate is exist..
Help me analyze this ..
What do you mean with you can't find the parent details? You should be able to see them with tc -s -d class show dev ethx .
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/