Wondershaper working, but not quite as expected
Hello, LARTC-List
I try to get my traffic-shaping done with Wondershaper 1.1a. When I run the script, the verbose output looks good (using a SuSE-8.2-box with iproute2-2.4.7-473):
+ DOWNLINK00
+ UPLINK0
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: htb default 20
+ tc class add dev ppp0 parent 1: classid 1:1 htb rate 150kbit burst 6k
+ tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 150kbit burst 6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 135kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30 htb rate 120kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:20 handle 20:
sfq perturb 10+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip protocol 1 0xff flowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1
My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the values are allright. I then start an upload and am pleased to see that the upload-rate stays at 150kBit, as set. Pings then are fine.
But that upload limit is somehow not really enforced. When starting a second upload, the total rate (checked with iptraf) exceeds the set 150kBit and is only restricted by the line limit - pings of well over 3 seconds are the result.
What did I do wrong here?
Signature · 7 lines
Cheers, Michael aka. Tron _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Michael,
Maybe we can help you out much better if you could space out the
sentences below. They seem to be a jigsaw puzzle.
Trevor
Quoted 41 lines · Michael Frotscher
Hello, LARTC-List
I try to get my traffic-shaping done with Wondershaper 1.1a. When I run the script, the verbose output looks good (using a SuSE-8.2-box with iproute2-2.4.7-473):
+ DOWNLINK00
+ UPLINK0
+ DEV=ppp0
+ NOPRIOHOSTSRC> + NOPRIOHOSTDST> + NOPRIOPORTSRC> + NOPRIOPORTDST> + '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: htb default 20
+ tc class add dev ppp0 parent 1: classid 1:1 htb rate 150kbit burst 6k
+ tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 150kbit burst
6k prio 1+ tc class add dev ppp0 parent 1:1 classid 1:20 htb rate
135kbit burst 6k prio 2+ tc class add dev ppp0 parent 1:1 classid 1:30
htb rate 120kbit burst 6k prio 2+ tc qdisc add dev ppp0 parent 1:10
handle 10: sfq perturb 10+ tc qdisc add dev ppp0 parent 1:20 handle 20:
sfq perturb 10+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip
tos0x100xffflowid 1:10+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip protocol 10xffflowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 10 u32 match ip protocol 60xffmatch u80x050x0fat 0 match u160x00000xffc0at 2 match u80x100xffat 33 flowid 1:10+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip
dst 0.0.0.0/0 flowid 1:20+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip
src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the values are allright. I then start an upload and am pleased to see that the upload-rate stays at 150kBit, as set. Pings then are fine.
But that upload limit is somehow not really enforced. When starting a second upload, the total rate (checked with iptraf) exceeds the set 150kBit and is only restricted by the line limit - pings of well over 3 seconds are the result.
What did I do wrong here?
Signature · 9 lines
( >- LINUX, It's all about CHOICE -< ) /~\ __ [email protected] __ /~\ | \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hallo, Trevor
Quoted 2 lines
Maybe we can help you out much better if you could space out the
sentences below. They seem to be a jigsaw puzzle.
Sorry, you are right - I think my word-wrapping is messing this up. I'll post it again, disregarding line lengths.
This is the verbose output when the script starts:
+ DOWNLINK00
+ UPLINK0
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit
+ tc class add dev ppp0 parent 1: classid 1:1 cbq rate 150kbit allot 1500 prio 5 bounded isolated
+ tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 150kbit allot 1600 prio 1 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 135kbit allot 1600 prio 2 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 120kbit allot 1600 prio 2 avpkt 1000
+ tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20
+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1
This is the status information while running:
+ DOWNLINK00
+ UPLINK0
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' status = status ']'
+ tc -s qdisc ls dev ppp0
qdisc ingress ffff:
Sent 264605 bytes 1195 pkts (dropped 0, overlimits 0)
qdisc sfq 30: limit 128p quantum 1492b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc sfq 20: limit 128p quantum 1492b perturb 10sec
Sent 390490 bytes 610 pkts (dropped 0, overlimits 0)
qdisc sfq 10: limit 128p quantum 1492b perturb 10sec
Sent 47228 bytes 942 pkts (dropped 0, overlimits 0)
qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
Sent 437758 bytes 1553 pkts (dropped 0, overlimits 2037)
borrowed 0 overactions 0 avgidle 624 undertime 0
+ tc -s class ls dev ppp0
class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
Sent 40 bytes 1 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 150Kbit prio 1
Sent 47288 bytes 943 pkts (dropped 0, overlimits 351)
borrowed 0 overactions 94 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 150Kbit (bounded,isolated) prio 5
Sent 437778 bytes 1553 pkts (dropped 0, overlimits 0)
borrowed 161 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 135Kbit prio 2
Sent 390490 bytes 610 pkts (dropped 0, overlimits 1868)
borrowed 161 overactions 263 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 120Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
+ exit
I hope this helps.
Signature · 7 lines
Gru�, Michael aka. Tron _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/