slowing down traffic to a certain port
This is my first attempt at understanding lartc:
I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was.
so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands):
$ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
then attach a tbf qdisc at 1:2 :
$ tc qdisc add dev eth0 parent 1:2 handle 20: tbf rate 2kbit buffer 100 limit 300
now i want traffic to port 4662 to be enqueued to the tbf qdisc:
$ tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip sport 4662 0xffff flowid 1:2 but it doesn't work: RTNETLINK answers: Invalid argument
why? wrong syntax?
thanks
Radu
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Radu Maurer
This is my first attempt at understanding lartc:
I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was.
so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands):
$ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Quoted 8 lines
then attach a tbf qdisc at 1:2 :
$ tc qdisc add dev eth0 parent 1:2 handle 20: tbf rate 2kbit buffer 100 limit 300now i want traffic to port 4662 to be enqueued to the tbf qdisc:
$ tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip sport 4662 0xffff flowid 1:2 but it doesn't work: RTNETLINK answers: Invalid argument
See lartc.org and docum.org for more information / scripts / tips about traffic shaping.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/