Wondershaper only shaping one connection?
Hello, LARTC-List
I still try to get my traffic-shaping done with Wondershaper 1.1a, but it does not work
as expected. When I run the script, the verbose output looks good (using a SuSE-8.2-SMP-box with iproute2-2.4.7-473):
+ DOWNLINK00
+ UPLINK0
+ DEV=ppp0
+ NOPRIOHOSTSRC+ NOPRIOHOSTDST+ NOPRIOPORTSRC+ NOPRIOPORTDST+ '[' '' = status ']'
+ tc qdisc del dev ppp0 root
+ tc qdisc del dev ppp0 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev ppp0 root handle 1: cbq avpkt 1000 bandwidth 10mbit
+ tc class add dev ppp0 parent 1: classid 1:1 cbq rate 150kbit allot 1500 prio 5 bounded isolated
+ tc class add dev ppp0 parent 1:1 classid 1:10 cbq rate 150kbit allot 1600 prio 1 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:20 cbq rate 135kbit allot 1600 prio 2 avpkt 1000
+ tc class add dev ppp0 parent 1:1 classid 1:30 cbq rate 120kbit allot 1600 prio 2 avpkt 1000
+ tc qdisc add dev ppp0 parent 1:10 handle 10: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:20 handle 20: sfq perturb 10
+ tc qdisc add dev ppp0 parent 1:30 handle 30: sfq perturb 10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1:0 protocol ip prio 11 u32 match ip protocol 1 0xff flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 12 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 flowid 1:10
+ tc filter add dev ppp0 parent 1: protocol ip prio 18 u32 match ip dst 0.0.0.0/0 flowid 1:20
+ tc qdisc add dev ppp0 handle ffff: ingress
+ tc filter add dev ppp0 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 1800kbit burst 10k drop flowid :1
My ADSL-Line performs 2MBit down and 192kbit upstream, so I guess the values are allright. I then start an upload and am pleased to see that the upload-rate stays at 150kBit, as set. Pings then are fine.
But that upload limit is somehow not really enforced. When starting a second upload, the total rate (checked with iptraf) exceeds the set 150kBit and is only restricted by the line limit - pings of well over 3 seconds are the result.
What did I do wrong?
Signature · 7 lines
Sincerely, Michael _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/