Skip to contentSkip to conversation

Filter problem

LARTC Vitor Carlos Flausino 3 participants 4 messages Jul 17, 2003 – Aug 24, 2004

lore
Share & tools
lore
#0 lore raw

I again.
I have the following statements:

#Initializing traffic control...
tc qdisc add dev br0 root handle 1:0 htb

#Loading queue disciplines for plis230 network...
tc class add dev br0 parent 1:0 classid 1:1 htb rate 512kbit ceil 512kbit

#Loading queue disciplines for pmad048 network...
tc class add dev br0 parent 1:1 classid 1:20 htb rate 30kbit ceil 30kbit #server queue
tc class add dev br0 parent 1:20 classid 1:21 htb rate 6kbit ceil 30kbit tc filter add dev br0 protocol ip parent 1:0 prio 1 u32 match ip dst 57.227.233.3 flowid 1:21
tc qdisc add dev br0 parent 1:21 handle 200:0 sfq perturb 10

--After pinging host 57.227.233.3 a while why I get the result of 0 packets sent through that filter?

bridge:/etc/rc.d # tc -s -d qdisc show dev br0;tc -s -d class show dev br0 qdisc htb 1: r2q 10 default 0 direct_packets_stat 128 ver 3.10 Sent 20832 bytes 128 pkts (dropped 0, overlimits 0)

class htb 1:1 root rate 512Kbit ceil 512Kbit burst 2254b/8 mpu 0b cburst 2254b/8 mpu 0b level 7
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 28187 ctokens: 28187

class htb 1:20 parent 1:1 rate 30Kbit ceil 30Kbit burst 1637b/8 mpu 0b cburst 1637b/8 mpu 0b level 6
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 349439 ctokens: 349439

class htb 1:21 parent 1:20 prio 0 quantum 1000 rate 6Kbit ceil 30Kbit burst 1606b/8 mpu 0b cburst 1637b/8 mpu 0b level 0
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
lended: 0 borrowed: 0 giants: 0
tokens: 1714132 ctokens: 349439

Thankx a lot,
-vcf

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Vitor Carlos Flausino

I found what the problem was.

Insted of br0 in configurations, if I use eth0 it works (hum... queer).

Thkx any way,
-vcf

Quoted 7 lines · Stef Coene
Quoted 4 lines · Vitor Carlos Flausino

I again.
I have the following statements:

Quoted 7 lines

Maybe this can help :

http://www.docum.org/stef.coene/qos/faq/cache/41.html

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Vitor Carlos Flausino

Hi !
I want to share my bandwidth between 10 computers. I want to redirect computer A(192.168.1.4) to htb class 1:2 and the others to htb class 1:3. But the
last tc filter doesn't work :
Error message : "Unknown filter "flowid", hence option "1:3" is unparsable. "

I know the option "default" for htb but I don't want to use it for some reasons.
I also tried "tc filter add dev imq0 protocol ip parent 1:1 prio 2 u32 flowid 1:3" but I got this error : "RTNETLINK answers: Invalid argument"

Any ideas?

My Script with imq + htb
-----------------------------------------------------------

ip link set imq0 up
iptables -t mangle -A PREROUTING -j IMQ --todev 0

tc qdisc add dev imq0 handle 1: root htb
tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit tc class add dev imq0 parent 1:1 classid 1:2 htb rate 256kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:3 htb rate 256kbit ceil 512kbit

tc filter add dev imq0 protocol ip parent 1:1 prio 1 u32 match ip dst 192.168.1.4/32 flowid 1:2
tc filter add dev imq0 protocol ip parent 1:1 prio 2 flowid 1:3

_________________________________________________________________
MSN Messenger http://g.msn.fr/FR1001/866 : dialoguez en direct et gratuitement avec vos amis !

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/