Skip to contentSkip to conversation

arpd question

LARTC Vishwanatn T. K. 2 participants 3 messages Jul 23, 2003

lore
Share & tools
lore
#1 lore raw
independence:/usr/src/linux# grep NETLINK .config
# CONFIG_NETLINK_DEV is not set
Maybe this one? In menuconfig it's called "Netlink device emulation".

Balint

----- Original Message -----
From: "Vishwanatn T. K." <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 23, 2003 9:48 AM
Subject: [LARTC] arpd question

Quoted 6 lines

Hi all,

I have noticed that the "CONFIG_NETLINK" has been removed since kernel version 2.4.17, does this mean that we cannot use "arpd" with kernel versions 2.4.17 onwards.

Quoted 7 lines

vishy

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Vishwanatn T. K.
Quoted 3 lines · Balint Laszlo BILLER
independence:/usr/src/linux# grep NETLINK .config
# CONFIG_NETLINK_DEV is not set
Maybe this one? In menuconfig it's called "Netlink device emulation".

As per my knowledge, "Netlink device emulation" is not required in the newer kernels (2.4.x). Correct if i am wrong.

Also "CONFIG_NETLINK" was last available in 2.4.16. The option in the menuconfig is called "Kernel/User netlink socket" and the "Netlink device emulation" option shows up only if you select the previous one.

I have recently tried using "arpd" with 2.4.20 and 2.4.21 and felt that the kernel is not using arpd at all.

Any pointer or information regarding using arpd with 2.4.20/21 will be greatly appreciated.

vishy

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/