Skip to contentSkip to conversation

HTB and filters on many levels - Workaround found

LARTC Daniel Brahneborg 3 participants 3 messages Jul 26, 2003 – Sep 16, 2003

lore
Share & tools
lore
#0 lore raw

I found a little workaround, but I'm not really happy with it.

Quoted 28 lines · Daniel Brahneborg

My setup is like this:

ISP - [ eth0 'firewall machine' eth1 ] - LAN

I'd like to split the traffic evenly between the firewall and the LAN, and then prioritize traffic within those classes, similarly to the example in the HTB User Guide. I want something like this:

qdisc root 1: htb default 2

	1:9 htb rate 240
		1:1 htb rate 120 ceil 240
			1:11 htb rate 20 ceil 80 prio 1
				filter: ssh, ack, etc
				11: pfifo
			1:12 htb rate 60 ceil 200 prio 2
				no filter
				12: pfifo
			1:13 htb rate 20 ceil 80 prio 3
				filter: direct connect
				13: pfifo
		1:2 htb rate 120 ceil 240
			1:21 htb rate 20 ceil 80 prio 1
				21: pfifo
			1:22 htb rate 60 ceil 200 prio 2
				22: pfifo
			1:23 htb rate 20 ceil 80 prio 3
				23: pfifo
Quoted 3 lines

I then use iptables -j MARK to set a '1' if the traffic comes from eth1. If not, it should end up in 1:2, and 1:1 and 1:2 should be able to borrow from each other.

What I do now is to use ipfilter to set marks on the packets for all six classes, and then set all filters on 1:0. A bit more work for iptables, but it seems to work. Is it a bug that a fiter can't be added to a class?

/Basic

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 1 line · Daniel Brahneborg

I found a little workaround, but I'm not really happy with it.

<SNIP>

Quoted 8 lines
Quoted 3 lines

I then use iptables -j MARK to set a '1' if the traffic comes from eth1. If not, it should end up in 1:2, and 1:1 and 1:2 should be able to borrow from each other.

What I do now is to use ipfilter to set marks on the packets for all six classes, and then set all filters on 1:0. A bit more work for iptables, but it seems to work. Is it a bug that a fiter can't be added to a class?

It's by design AFAIK.
Packets are enqueued at qdiscs and, thus, it is only meaningful to be able to attach filters to qdiscs.

I may be wrong though...

Also, the HTB docs instructs the user to attach filters to the root.

Signature · 7 lines
Mvh. / Best regards,
Steen Suder		<http://www.suder.dk/>
ICQ UIN			4133803

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Daniel Brahneborg
Quoted 14 lines · privat
Quoted 1 line · Daniel Brahneborg

I found a little workaround, but I'm not really happy with it.

<SNIP>

Quoted 8 lines
Quoted 3 lines

I then use iptables -j MARK to set a '1' if the traffic comes from eth1. If not, it should end up in 1:2, and 1:1 and 1:2 should be able to borrow from each other.

What I do now is to use ipfilter to set marks on the packets for all six classes, and then set all filters on 1:0. A bit more work for iptables, but it seems to work. Is it a bug that a fiter can't be added to a class?

Quoted 7 lines

It's by design AFAIK.
Packets are enqueued at qdiscs and, thus, it is only meaningful to be able to attach filters to qdiscs.

I may be wrong though...

Also, the HTB docs instructs the user to attach filters to the root.

You don't have to. You can add the filters to classes and "stack" them. If a packet is enqueued in the htb qdisc, all filters attached to the root qdisc are checked. If a packet is redirected to a leaf class, it's dequeued in the qdisc attached to the class. If a packet is redirected to a class, the filters attached to that class are examined.

In previously htb versions, htb hangs if you redirect a packet to a non-leaf class. That's solved in later versions.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/