Skip to contentSkip to conversation

snooping - the crux of the problem

LARTC Jim Redman 2 participants 2 messages Jul 28, 2003 – Jul 29, 2003

lore
Share & tools
lore

Jim Redman

author
#0 lore raw

I have a computer with two interfaces, say with addresses 192.168.1.1 and 192.168.1.2. I want to set up routing such that when I ping 192.168.1.1 it goes out through 192.168.1.2 and not to the local interface.
Is this possible - all my attempts so far have been unsuccessful? If so, pointers, etc. would be gratefully appreciated.

Jim

Signature · 6 lines
Jim Redman
(505) 662 5156 x85
http://www.ergotech.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Have you tried adding static route for 192.168.1.1 via 192.168.1.2 ?

Madhuri

Quoted 10 lines · Jim Redman

I have a computer with two interfaces, say with addresses 192.168.1.1 and 192.168.1.2. I want to set up routing such that when I ping 192.168.1.1 it goes out through 192.168.1.2 and not to the local interface.
Is this possible - all my attempts so far have been unsuccessful? If so, pointers, etc. would be gratefully appreciated.

Jim

Quoted 9 lines

--

Jim Redman
(505) 662 5156 x85
http://www.ergotech.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/