Detecting stale TCP/IP
Dear lartc,
I have a TCP/IP server connecting to a GPRS PDA.
Unfortuntatelly GPRS seems unstable, and for this reason or another, a interupt to the TCP/IP connection (like switching the clinet off suddenly) does not terminate the TCP/IP connection. It can still be seen in 'netstat', and a test by the application shows it present. It may time out after about 40 minutes.
My real problem is a call to 'write' in non-blocking mode returns success when the other end of the TCP/IP connection is not there.
Does any member know a reference to where I can test for the reply TCP/IP 'ACK' packet for this write call, and therefore timeout and terminate the connection?
Thanks in advance,
Ben Clewett.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Ben Clewett
Dear lartc,
I have a TCP/IP server connecting to a GPRS PDA.
Unfortuntatelly GPRS seems unstable, and for this reason or another, a interupt to the TCP/IP connection (like switching the clinet off suddenly) does not terminate the TCP/IP connection. It can still be seen in 'netstat', and a test by the application shows it present. It may time out after about 40 minutes.
Quoted 6 lines
My real problem is a call to 'write' in non-blocking mode returns success when the other end of the TCP/IP connection is not there.
Does any member know a reference to where I can test for the reply TCP/IP 'ACK' packet for this write call, and therefore timeout and terminate the connection?
You can try using the ioctl TIOCOUTQ, see socket(7). Although this manpage states otherwise, at least on 2.4.21 and newer it returns the number of unacked bytes.
Implement a select-loop, and see if the value of this ioctl changes. If not, close the connection, and the kernel should handle the rest.
VrGr,
Signature · 7 lines
Jasper Spaans http://jsp.vs19.net/contact/ <= Het bedrijf van de appelcomputer is niet => <= verantwoordelijk voor de omzettingsprecisie. => _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Jasper,
Thanks. This works absolutelly perfectly!
I found that simply waiting for the TIOCOUTQ to fall to zero gives a perfect indication of data having been sent correctly, and if not, that the connection is stale.
I have put this into a:
while (test) sleep(1);
But this waists time. With a ping of 300ms being common, a sleep of 1000ms is way to much to check every send, so I can only check agregates of sending. Would anybody know of a better method?
Ben
Quoted 24 lines · Jasper Spaans
Quoted 10 lines · Ben Clewett
Dear lartc,
I have a TCP/IP server connecting to a GPRS PDA.
Unfortuntatelly GPRS seems unstable, and for this reason or another, a interupt to the TCP/IP connection (like switching the clinet off suddenly) does not terminate the TCP/IP connection. It can still be seen in 'netstat', and a test by the application shows it present. It may time out after about 40 minutes.
Quoted 6 lines
My real problem is a call to 'write' in non-blocking mode returns success when the other end of the TCP/IP connection is not there.
Does any member know a reference to where I can test for the reply TCP/IP 'ACK' packet for this write call, and therefore timeout and terminate the connection?
You can try using the ioctl TIOCOUTQ, see socket(7). Although this manpage states otherwise, at least on 2.4.21 and newer it returns the number of unacked bytes.
Quoted 5 lines
Implement a select-loop, and see if the value of this ioctl changes. If not, close the connection, and the kernel should handle the rest.
VrGr,
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/