How to limit forwarding rate of a device
Quoted 23 lines · anzp
lartc
Both NIC of my Linux Computer are 100M. I want to limit it to 1M. I
used the following script: ----------------------------
#/bin/shDEV="dev eth0"
echo $DEV TC="/usr/src/redhat/SOURCES/iproute2-2.4.7src/iproute2/tc/tc" $TC qdisc add $DEV handle 1:0 root dsmark indices 64set_tc_index$TC filter add $DEV parent 1:0 protocol ip prio 1 tcindex mask0xfcshift 2 $TC qdisc add $DEV parent 1:0 handle 2:0 cbq bandwidth 1Mbit cell 8 avpkt 1000 mpu 64 $TC class add $DEV parent 2:0 classid 2:1 cbq bandwidth 1Mbit rate 150Kbit avpkt 500 prio 1 bounded isolated allot 1514 weight 1 maxburst 10 $TC qdisc add $DEV parent 2:1 pfifo limit 5
$TC filter add $DEV parent 2:0 protocol ip prio 1 handle0x2etcindex classid 2:1pass_on#BE class(2:2)
$TC class add $DEV parent 2:0 classid 2:2 cbq bandwidth 1Mbit rate 500Kbit avpkt 1000 prio 7 allot 1514 weight 1 maxburst 21 borrow split 2:0 defmap0xffff$TC qdisc add $DEV parent 2:2 red limit 10KB min 1KB max 8KB burst 4 avpkt 1000 bandwidth 1Mbit probability 0.4 $TC filter add $DEV parent 2:0 protocol ip prio 2 handle 0 tcindex mask 0 classid 2:2pass_on
Quoted 7 lines
------------------------------
The device eth1 has similar script.But it looks like have no effect. I can download from it with 40Mbps
through ftp protocol.Why, who can help me?
Your setup is wrong. Take a look at www.docum.org on the test pages. I have some cbq scripts as example that you can use.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/