For a root-qdisc, can the bandwidth =?utf-8?q?be=0A=20smaller=20than=20the=20bandwidth=
Quoted 6 lines · Martin A. Brown
: > For a root-qdisc, can the bandwidth be smaller than the bandwidth of : > the device
:
: yes. The root qdisc bandwidth *should* be set smaller than the : bandwidth of the device by about 5%
Quoted 7 lines
Well, wouldn't you say it depends on the qdisc in use? If you are using CBQ, see the comments in section 9.5.4, "The famous CBQ qdisc":
http://lartc.org/howto/lartc.qdisc.classful.html
In short, you'll use the bandwidth parameter to both your "tc qdisc add" and your "tc class add" commands.
It's also not clear to me what anzp means with bandwidth. If he means the bandwidth parameter, then it's the nic speed. The bandwidth parameter has to be the NIC speed so 10 or 100 mbit.
But you can add a bounded class to the root qdisc so you can limit all bandwidth and this can be different from the nic bandwidth.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/