Skip to contentSkip to conversation

any errors in this script?

LARTC Tom Verbeek 3 participants 3 messages Aug 7, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

ok, I dropped the idea of using Wondershaper without having background knowledge and are now trying to set up my own script :)

Can anyone please take a look at the following script and point me to any errors? Thanks!

my max. upload bandwidth is 192 Kbit/s and my goal is to ensure smooth gameplay (udp) while allowing other protocols to use up the remaining bandwidth. Mail is supposed to be treated with the least priority.

Cheers,
Tom.

#-----------------------------------------------------

# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev ppp0 root    2> /dev/null > /dev/null
tc qdisc del dev ppp0 ingress 2> /dev/null > /dev/null

#root htb with non-classified data to 1:11 tc qdisc add dev ppp0 root handle 1: htb default 11

#max uplink class
tc class add dev ppp0 parent 1: classid 1:1 htb rate 180kbit ceil 180kbit burst 2k

#interactice class
tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 130kbit ceil 180kbit burst 2k prio 0

#default class
tc class add dev ppp0 parent 1:1 classid 1:11 htb rate 40kbit ceil 180kbit burst 2k prio 1

#slow class
tc class add dev ppp0 parent 1:1 classid 1:12 htb rate 10kbit ceil 70kbit burst 2k prio 2

#put udp into interactive class
tc filter add dev ppp0 parent 1:0 protocol ip prio 0 u32 \
match ip protocol 17 0xff \
flowid 1:10

#put mail into slow class
tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \
match ip sport 25 0xffff \
flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \
match ip dport 25 0xffff \
flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \
match ip sport 110 0xffff \
flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \
match ip dport 110 0xffff \
flowid 1:12
#-----------------------------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi,

I would suggest adding an sfq qdic to class 1:10, 1:11 and 1:12:

tc qdisc add dev ppp0 handle 2:0 parent 1:10 sfq perturb 10 tc qdisc add dev ppp0 handle 3:0 parent 1:11 sfq perturb 10 tc qdisc add dev ppp0 handle 4:0 parent 1:12 sfq perturb 10

nothing else would have to be changed, sfq makes sure that when your upload is maxed no connection can dominate over others and everyone gets a fair amount of the bandwidth.

For more info on sfq read chapter 9.2.3 of the LARTC howto.

Regards,
Ata

----- Original Message -----
From: "Tom Verbeek" <[email protected]>
To: <[email protected]>
Sent: Thursday, August 07, 2003 2:08 PM
Subject: [LARTC] any errors in this script?

Quoted 20 lines

Hi,

ok, I dropped the idea of using Wondershaper without having background knowledge and are now trying to set up my own script :)

Can anyone please take a look at the following script and point me to any errors? Thanks!

my max. upload bandwidth is 192 Kbit/s and my goal is to ensure smooth gameplay (udp) while allowing other protocols to use up the remaining bandwidth. Mail is supposed to be treated with the least priority.

Cheers,
Tom.

#-----------------------------------------------------

# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev ppp0 root    2> /dev/null > /dev/null
tc qdisc del dev ppp0 ingress 2> /dev/null > /dev/null
Quoted 5 lines

#root htb with non-classified data to 1:11 tc qdisc add dev ppp0 root handle 1: htb default 11

#max uplink class
tc class add dev ppp0 parent 1: classid 1:1 htb rate 180kbit ceil 180kbit

burst 2k

Quoted 3 lines

#interactice class
tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 130kbit ceil

180kbit burst 2k prio 0

Quoted 3 lines

#default class
tc class add dev ppp0 parent 1:1 classid 1:11 htb rate 40kbit ceil 180kbit

burst 2k prio 1

Quoted 3 lines

#slow class
tc class add dev ppp0 parent 1:1 classid 1:12 htb rate 10kbit ceil 70kbit

burst 2k prio 2

Quoted 19 lines

#put udp into interactive class
tc filter add dev ppp0 parent 1:0 protocol ip prio 0 u32 \

   match ip protocol 17 0xff \
   flowid 1:10

#put mail into slow class
tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip sport 25 0xffff \
   flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip dport 25 0xffff \
   flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip sport 110 0xffff \
   flowid 1:12
Quoted 12 lines

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip dport 110 0xffff \
   flowid 1:12

#-----------------------------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Tom Verbeek
Quoted 4 lines · Tom Verbeek

Hi,

ok, I dropped the idea of using Wondershaper without having background knowledge and are now trying to set up my own script :)

ok :)

Quoted 45 lines

my max. upload bandwidth is 192 Kbit/s and my goal is to ensure smooth gameplay (udp) while allowing other protocols to use up the remaining bandwidth. Mail is supposed to be treated with the least priority.

Cheers,
Tom.

#-----------------------------------------------------

# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev ppp0 root    2> /dev/null > /dev/null
tc qdisc del dev ppp0 ingress 2> /dev/null > /dev/null

#root htb with non-classified data to 1:11 tc qdisc add dev ppp0 root handle 1: htb default 11

#max uplink class
tc class add dev ppp0 parent 1: classid 1:1 htb rate 180kbit ceil 180kbit burst 2k

#interactice class
tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 130kbit ceil 180kbit burst 2k prio 0

#default class
tc class add dev ppp0 parent 1:1 classid 1:11 htb rate 40kbit ceil 180kbit burst 2k prio 1

#slow class
tc class add dev ppp0 parent 1:1 classid 1:12 htb rate 10kbit ceil 70kbit burst 2k prio 2

#put udp into interactive class
tc filter add dev ppp0 parent 1:0 protocol ip prio 0 u32 \

   match ip protocol 17 0xff \
   flowid 1:10

#put mail into slow class
tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip sport 25 0xffff \
   flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip dport 25 0xffff \
   flowid 1:12
Quoted 7 lines

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip sport 110 0xffff \
   flowid 1:12

tc filter add dev ppp0 parent 1:0 protocol ip prio 2 u32 \

   match ip dport 110 0xffff \
   flowid 1:12

You set a burst of 2k and that's too low. Just remove the burst parameter so htb can calculate the minimal burst for you.

Different prio's for the filters makes no different because it's only used to order the filters.

DIfferent prio's for htb classes can be dangerous. If a low prio class like class 1:10 receives more data then it's rate (130kbit), the latency can go way up. So it's important the you monitor your setup so your low prio classes are never overlimited.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/