Skip to contentSkip to conversation

Ipsec Tunnels

LARTC Osgaldo Suanzes 2 participants 2 messages Aug 15, 2003 – Aug 19, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

Im trying to setup a Vpn tunnel , to link 2 separated Lans using the
Ipsec Tools , available allready with the 2.4.21 kernels.

I found an example script on ipsec tunnels in LARTC Guide.

http://lartc.org/howto/lartc.ipsec.tunnel.html

1. How must the racoon.conf look like for an IpSec Tunnel? (If
it is needed)
2. What is the Esp number 34501 on the example script? Is it
generated? or is this picked up randomly by the Author?
3. Do I also have to create a password in Psk.txt on both ends?
or is it enough with the following line of the example script:

                                                         -E 3des-cbc

"123456789012123456789012";

Im a bit confused here, and would appreciate any help.

Thanks

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Am Fre, 2003-08-15 um 21.07 schrieb Osgaldo Suanzes:

Quoted 1 line

Im a bit confused here, and would appreciate any help.

Hi,

I have started an IPsec Howto covering Linux 2.6 and the KAME tools (setkey/racoon) and isakmpd.
You will find it at:
http://www.ipsec-howto.org

Feedback is welcome.

Cheers,

Ralf

Signature · 9 lines
Ralf Spenneberg
RHCE, RHCX

Book: Intrusion Detection für Linux Server   http://www.spenneberg.com
IPsec-Howto				     http://www.ipsec-howto.org
Honeynet Project Mirror:                     http://honeynet.spenneberg.org
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/