Skip to contentSkip to conversation

Policy Routing and NAT

LARTC Robert Felber 2 participants 4 messages Aug 23, 2003 – Aug 25, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

is there an issue with policy-routing and/or NAT?
I've been trying for months now to DNAT a host in a LAN.
The router has 3 NICs, 2 of them are connected to a) the internet and b) an extranet. Now a host XYZ is visible with a unique IP on both, the internet and extranet. I'll give you a little tcpdump fragment:
(eth0: inet, eth1: LAN, eth2: secured internet (extranet)) network 62.156.190. not administrable (t-systems).

eth0 < 62.156.190.37.48495 > 62.225.182.35.http
eth1 > 62.156.190.37.48495 > 192.168.0.3.http
eth1 < 192.168.0.3.http > 62.156.190.37.48495
eth2 > 62.225.182.35.http > 62.156.190.37.48495

as you can see, the packet leaves the wrong device. I've already tried iproute2 rules like:

$IP route add table 2 via $INET_ROUTER dev eth0
$IP rule add from 62.225.182.32/29 lookup 2

also i don't understand why the router NATs it with 62.225.182.35 when the postrouting rule is:

$IPTABLES -t nat -A POSTROUTING -o eth0 -s 192.168.0.3 \
-j SNAT --to-source 62.225.182.35

(if you want to understand the full script look at
http://robtone.mine.nu/ipt-set.txt )

Any suggestions or hints would be more than appreciated, thanks. :)

Signature · 6 lines
| Robert Felber (System-Administrator)            Tel: +49 (0) 89 / 453 12-86 |
| Autohaus Erich Kuttendreier                     Fax: +49 (0) 89 / 453 12-80 |
| Drosselweg 21                                   ICQ:              170059451 |
| 81827 Muenchen                                  PGP:               896CF30B |
|                                                                             |
| PGP-Fingerprint: CF36 AA93 9716 63E8 962F 15CC A80E 1A79 BF77 25EA          |
#1 lore raw

Hi Robert,

Quoted 3 lines

$IP route add table 2 via $INET_ROUTER dev eth0
$IP rule add from 62.225.182.32/29 lookup 2

Try one of the latest -rc kernels or apply 66_netfilter-policy-routing.patch from netfilter patch-o-matic. The netfilter code had some issues wrt. policy routing and src based table selection.

Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Robert Felber

Am Sa, 2003-08-23 um 11.27 schrieb Patrick McHardy:

Quoted 1 line

Try one of the latest -rc kernels or apply 66_netfilter-policy-routing.patch

Am trying 2.4.22-rc3 now, but patches are patches - and sometimes they just won't compile. If the 4th try of a Kernelbuild fails also, I'll try the netfilter patch. Thanks so far. :)

--
rob

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Robert Felber

Hi Patrick,

I'm using 2.4.22-rc4 now, but the problem remains. It's like i need a 3rd round through the routing table - but after SNAT has been done.

On Sa, 2003-08-23 at 11.27 wrote Patrick McHardy:

Quoted 11 lines

Hi Robert,

Quoted 3 lines

$IP route add table 2 via $INET_ROUTER dev eth0
$IP rule add from 62.225.182.32/29 lookup 2

Try one of the latest -rc kernels or apply 66_netfilter-policy-routing.patch from netfilter patch-o-matic. The netfilter code had some issues wrt. policy routing and src based table selection.

Patrick

Signature · 6 lines
| Robert Felber (System-Administrator)            Tel: +49 (0) 89 / 453 12-86 |
| Autohaus Erich Kuttendreier                     Fax: +49 (0) 89 / 453 12-80 |
| Drosselweg 21                                   ICQ:              170059451 |
| 81827 Muenchen                                  Web: http://robtone.mine.nu |
|                                                 PGP:               896CF30B |
| PGP-Fingerprint: CF36 AA93 9716 63E8 962F 15CC A80E 1A79 BF77 25EA          |