Skip to contentSkip to conversation

cbq_default

LARTC Raghuveer 2 participants 3 messages Sep 1, 2003 – Sep 2, 2003

lore
Share & tools
lore

Raghuveer

author
#0 lore raw

Hi Martin,

After shaping certain ip's and services, I would like to place the rest ip's and services as default i.e can utilize only remaining bandwidth. I know in HTB default can be defined. Can I get an idea that how can I proceed in case of CBQ. Few example may definately help.

Regards
-Raghu

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · Raghuveer

Hi Martin,

After shaping certain ip's and services, I would like to place the rest ip's and services as default i.e can utilize only remaining bandwidth. I know in HTB default can be defined. Can I get an idea that how can I proceed in case of CBQ. Few example may definately help.

You can use the u32 filter and 0/0 for the src (or dst) parameter.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Raghuveer
Quoted 5 lines · Stef Coene
Quoted 2 lines · Raghuveer

Hi Martin,

Quoted 9 lines
Quoted 6 lines

After shaping certain ip's and services, I would like to place the rest ip's and services as default i.e can utilize only remaining bandwidth. I know in HTB default can be defined. Can I get an idea that how can I proceed in case of CBQ. Few example may definately help.

You can use the u32 filter and 0/0 for the src (or dst) parameter.

fine Stef, this is doing...

Regards
-Raghu

Quoted 4 lines

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/