Anyone with a similar setup want to share their setup?
Hi!
We currently have T1 to provider A, T1 for peering only to provider B, and 10M Ethernet to provider C. A and B bill is a fixed rate, C bills us based on usage.
We have 4 interfaces on our router, one facing each provider, and the last facing ourselves.
I'd like to rate-limit provider C to a given amount - I can do that outbound easily enough, how about inbound - anyone got a sample?
I could throw in a second machine doing bridging and rate limiting, but that doesn't seem like much fun.
Signature · 7 lines
Michael 'Moose' Dinn, Twisted Pair Network Consulting Incorporated [email protected] // 902 423 4700 (voice) // 902 423 8407 (fax) Colocate your server in our underground bunker! _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Michael 'Moose' Dinn
I'd like to rate-limit provider C to a given amount - I can do that outbound easily enough, how about inbound - anyone got a sample?
Take a look at the IMQ + HTB doco.
http://lartc.org/howto/lartc.imq.html
or, throttle the incoming traffic the easier (and less efficient) way with the ingress policer.
last lines in:
http://lartc.org/howto/lartc.cookbook.ultimate-tc.html
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Michael 'Moose' Dinn
Hi!
We currently have T1 to provider A, T1 for peering only to provider B, and 10M Ethernet to provider C. A and B bill is a fixed rate, C bills us based on usage.
Quoted 8 lines
We have 4 interfaces on our router, one facing each provider, and the last facing ourselves.
I'd like to rate-limit provider C to a given amount - I can do that outbound easily enough, how about inbound - anyone got a sample?
I could throw in a second machine doing bridging and rate limiting, but that doesn't seem like much fun.
If C is feeding _through_ your router to your LAN, you can rate limit _egress_ to your internal network from C. It's a bit of a hack doing it that way, but it works well enough from experience. If your router is the consumer of traffic (ie a proxy server, or such) then probably you want to play with ingress policing.
Signature · 3 lines
_______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/