newbie - shaping a PSTN connection
Hi - I've been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links.
I'm now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.
I've been attempting to use the wondershaper script with this PSTN connection - but don't seem to be able to improve latency at all. doing a bit of research I've only really found references to shaping broadband connections. Surely shaping of PSTN ppp connections is equally (probably more) applicable?
I was hoping that someone might be able to point me in the direction of information relating to successfully providing my users high priority terminal services traffic over the PSTN link.
I would also appreciate being shown where I might find a searchable archive of this list.
Thanks in advance!
- Dan.
PS. in case you think I'm mad running 8 users over PSTN - it's just a stop-gap while we wait for our SHDSL installations - which should be in by the end of the month. In future I will be using the PSTN as a backup incase the SHDSL goes down though - so any shaping work will not be lost!
__________________________________
Euroluce Lighting Australia PTY LTD
92-94 Tennyson Road, Mortlake, NSW 2137
Ph: (02) 9743 6099 Fx: (02) 9743 6406
http://www.euroluce.com.au/
The contents of this email are confidential. If you are not, or believe you may not be, the intended recipient of this email, please let us know by reply and then delete it from your system. You should not copy the message or disclose its contents to anyone. No warranty or other assurance is given by us that this email is free of any virus or any other defect or error.
Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. If verification is required please request a hard-copy version.
Scanned by Inflex - Queries to: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Daniel Horth
Hi - I've been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links.
Are you using the cbq or htb shaping scripts ?
Quoted 5 lines
I've been attempting to use the wondershaper script with this PSTN connection - but don't seem to be able to improve latency at all. doing a bit of research I've only really found references to shaping broadband connections. Surely shaping of PSTN ppp connections is equally (probably more) applicable?
If you're using low bandwidth values with the htb qdisc, you might have to change the r2q parameter - see http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
Quoted 2 lines
I would also appreciate being shown where I might find a searchable archive of this list.
just use google on http://mailman.ds9a.nl/pipermail/lartc/
regards
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
No worries. Why does it work?
Every packet leaving an interface is up to MTU bytes in length. Let's say that a byte is ten bits (8+ 1start+1stop). So a 1500byte packet is 15000 bits. On a 28.8K connection, that means a 1500 byte packet takes 0.52 seconds to transmit. Assuming that the queueing discipline is FIFO (first-in-first out) and the queue length on the interface is, say, 10 packets, a packet can take 10*0.52 seconds to get to the head of the queue. Plus transmission time, that's 5.2 (for queuing) +0.52 for transmission. Quite a delay.
You may be able to do better by shortening the packet queue on the interface (ip link set ppp0 qlen 4) for example. Or attaching an SFQ queueing discipline (tc qdisc add dev ppp0 root handle 1: sfq perturb
10) - although for SFQ, I think you'd want a more substantive queue length.
Quoted 42 lines · Daniel Horth
wow - from 8 second ping responses on my heavily loaded link to 2 second just by changing the MTU - sure I'll be able to improve further on that with experimentation.
thanks for that!
- dan.
-----Original Message-----
From: Dancer Vesperman [mailto:[email protected]]
Sent: Tuesday, 9 September 2003 6:37 PM
To: Daniel Horth
Subject: Re: [LARTC] newbie - shaping a PSTN connectionI'd seriously advise cutting your MTU/MRU down. A lot. Say as low as 562 or 168. If your MTU/MRU is defaulting to 1500, it's going to be hard to get any effective shaping on your link.
Quoted 1 line · Daniel Horth
Hi - I've been going through the LARTC how-to and have successfully used
the
Quoted 1 line
sample scripts (and wondershaper) with my xDSL links.
__________________________________
Euroluce Lighting Australia PTY LTD
92-94 Tennyson Road, Mortlake, NSW 2137
Ph: (02) 9743 6099 Fx: (02) 9743 6406
http://www.euroluce.com.au/The contents of this email are confidential. If you are not, or believe you may not be, the intended recipient of this email, please let us know by reply and then delete it from your system. You should not copy the message or disclose its contents to anyone. No warranty or other assurance is given by us that this email is free of any virus or any other defect or error.
Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. If verification is required please request a hard-copy version.
Scanned by Inflex - Queries to: [email protected]
Signature · 3 lines
_______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Damion de Soto
Quoted 1 line · Daniel Horth
Hi - I've been going through the LARTC how-to and have successfully
used
Quoted 3 lines
Quoted 2 lines
the
sample scripts (and wondershaper) with my xDSL links.Are you using the cbq or htb shaping scripts ?
The cbq scripts...
Quoted 1 line
Quoted 1 line
I've been attempting to use the wondershaper script with this PSTN
connection - but don't seem to be able to improve latency at all. doing a
Quoted 1 line
Quoted 1 line
bit of research I've only really found references to shaping broadband
connections. Surely shaping of PSTN ppp connections is equally (probably
Quoted 2 lines
Quoted 1 line
more) applicable?
If you're using low bandwidth values with the htb qdisc, you might have
to
Quoted 2 lines
change the
r2q parameter - see http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
I guess I need to do further reading on this - I was confused and thought that the htb script involved a different software set and as such I opted for the working cbq script. Anyway - The site you pointed at seems to have a good amount of interesting information - I'll have a good read through that before I post further questions!
Quoted 1 line
Quoted 1 line
I would also appreciate being shown where I might find a searchable
archive
Quoted 2 lines
Quoted 1 line
of this list.
just use google on http://mailman.ds9a.nl/pipermail/lartc/
that's what I tried first before posting any questions - but google don't have that URL indexed... then I worked out that with searching within a site using google it needs to be the top domain, not the full URL, ie:
shape ppp site:http://mailman.ds9a.nl/pipermail/lartc/
does not work, but:
shape ppp site:http://mailman.ds9a.nl
does... anyway - I digress, this is not a "how-to search using google" list after all! :)
thanks for the pointers, I'll be dropping by the list again once I've done a bit more research!
- Dan.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Dancer Vesperman
No worries. Why does it work?
Every packet leaving an interface is up to MTU bytes in length. Let's say that a byte is ten bits (8+ 1start+1stop). So a 1500byte packet is 15000 bits. On a 28.8K connection, that means a 1500 byte packet takes 0.52 seconds to transmit. Assuming that the queueing discipline is FIFO (first-in-first out) and the queue length on the interface is, say, 10 packets, a packet can take 10*0.52 seconds to get to the head of the queue. Plus transmission time, that's 5.2 (for queuing) +0.52 for transmission. Quite a delay.
Quoted 5 lines
You may be able to do better by shortening the packet queue on the interface (ip link set ppp0 qlen 4) for example. Or attaching an SFQ queueing discipline (tc qdisc add dev ppp0 root handle 1: sfq perturb
10) - although for SFQ, I think you'd want a more substantive queue length.
You can use sfq with a shorter queue :
http://www.docum.org/stef.coene/qos/faq/cache/21.html
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Damion de Soto
Quoted 2 lines · Daniel Horth
Hi - I've been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links.
Are you using the cbq or htb shaping scripts ?
Quoted 5 lines
I've been attempting to use the wondershaper script with this PSTN connection - but don't seem to be able to improve latency at all. doing a bit of research I've only really found references to shaping broadband connections. Surely shaping of PSTN ppp connections is equally (probably more) applicable?
Quoted 3 lines
If you're using low bandwidth values with the htb qdisc, you might have to change the r2q parameter - see
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
And I also have to promote my site a bit :)
http://docum.org
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/