Skip to contentSkip to conversation

IMQ Kernel panic - SOLVED may be usefull for someone

LARTC [email protected] 3 participants 3 messages Sep 10, 2003

lore
Share & tools
lore
#0 lore raw

Hi,
as I wrote in my last mail I had some troubles with running IMQ device, because it caused Kernel panic.

SOLUTION: Of course it was MY mistake, because I forgot to apply IMQ NAT patch.. So if you are trying to run IMQ device on NAT box, don't forget to apply imqnat patch (http://alfa.tailor.com.pl/imqhtb/imqnat.diff). Now it works perfectly...

Mike
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Mike,

I'm using IMQ+HTB in severel NAT Box's, and I never heard to speak about that IMQ NAT patch.
Someone can explain about that patch ?

Thanks.

[email protected] wrote:
| Hi,
| as I wrote in my last mail I had some troubles with running IMQ device, because

| it caused Kernel panic.
|
| SOLUTION: Of course it was MY mistake, because I forgot to apply IMQ

NAT patch..
| So if you are trying to run IMQ device on NAT box, don't forget to apply imqnat
| patch (http://alfa.tailor.com.pl/imqhtb/imqnat.diff). Now it works perfectly...

|
| Mike
| _______________________________________________
| LARTC mailing list / [email protected]
| http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
|
|

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE/XxOciLK8unYgEMQRAkEAAJ9dfTTG1SD6u2VcnQh4yTsJ5ARe3gCfUVbf MP07LRWoTzcDOZ0Yb+voybI=dgDK
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to [email protected]
Quoted 8 lines · Rodrigo P. Telles

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Mike,

I'm using IMQ+HTB in severel NAT Box's, and I never heard to speak about that IMQ NAT patch.
Someone can explain about that patch ?

I can. It makes sure IMQ is after dnat. So imq sees the real ip addresses packets.
But I don't know what this has to do with the kernel crash ....

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/