beginner question about imq
Hi!
I have to make a firewall which guarantees bandwidth to several clients (both upstream and downstream should be limitied). It has three interfaces, eth0 facing to the internet, eth1 to local network with several ip addresses (different subnets) and eth2 to dmz (webserver). Egress traffic is ok, I set up the tc rules to eth0 and the upstream limiting is fine. But I have to manage bandwidth of downloading too.
While eth0 has one public ip address, the firewall does masquerading to the local subnets (with local ip ranges). So should I set up an imq device on eth1 with iptables mangle through the prerouting chain to do traffic shaping to the subnets? In this case the packets arrive to eth1 already masqueraded (am I right?) and I can limit the ingress traffic of local adresses. Or should I use the imq on eth0? Doesn't it bothers egress shaping? I'm confused a little bit... :-s
Can you help me?
Thanks
Tom
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Szálka Tamás
Hi!
I have to make a firewall which guarantees bandwidth to several clients (both upstream and downstream should be limitied). It has three interfaces, eth0 facing to the internet, eth1 to local network with several ip addresses (different subnets) and eth2 to dmz (webserver). Egress traffic is ok, I set up the tc rules to eth0 and the upstream limiting is fine. But I have to manage bandwidth of downloading too.
While eth0 has one public ip address, the firewall does masquerading to the local subnets (with local ip ranges). So should I set up an imq device on eth1 with iptables mangle through the prerouting chain to do traffic shaping to the subnets? In this case the packets arrive to eth1 already masqueraded (am I right?) and I can limit the ingress traffic of local adresses. Or should I use the imq on eth0? Doesn't it bothers egress shaping? I'm confused a little bit... :-s Can you help me?
Quoted 3 lines
Thanks
Tom
I feel imq+HTB on eth0 is an ideal solution for ur requirement.
Regards
-Raghu
Quoted 7 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 19 lines · you
Quoted 17 lines · Szálka Tamás
Hi!
I have to make a firewall which guarantees bandwidth to several clients (both upstream and downstream should be limitied). It has three interfaces, eth0 facing to the internet, eth1 to local network with several ip addresses (different subnets) and eth2 to dmz (webserver). Egress traffic is ok, I set up the tc rules to eth0 and the upstream limiting is fine. But I have to manage bandwidth of downloading too. While eth0 has one public ip address, the firewall does masquerading to the local subnets (with local ip ranges). So should I set up an imq device on eth1 with iptables mangle through the prerouting chain to do traffic shaping to the subnets? In this case the packets arrive to eth1 already masqueraded (am I right?) and I can limit the ingress traffic of local adresses. Or should I use the imq on eth0? Doesn't it bothers egress shaping? I'm confused a little bit... :-s
Can you help me?
Quoted 6 lines
Quoted 2 lines
Thanks
TomI feel imq+HTB on eth0 is an ideal solution for ur requirement.
Regards
-Raghu
I'd like to filter the packages on their SNAT-ed (local) ip addresses. when the package enters the IMQ right after the iptables PREROUTING chain, does it have SNAT-ed ip addresses? As far as I know the SNAT happens in the POSTROUTING chain. Am I wrong? Or am I even more confused? :)
Tom
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 24 lines · Szálka Tamás
Quoted 23 lines · you
Quoted 17 lines · Szálka Tamás
Hi!
I have to make a firewall which guarantees bandwidth to several clients (both upstream and downstream should be limitied). It has three interfaces, eth0 facing to the internet, eth1 to local network with several ip addresses (different subnets) and eth2 to dmz (webserver). Egress traffic is ok, I set up the tc rules to eth0 and the upstream limiting is fine. But I have to manage bandwidth of downloading too. While eth0 has one public ip address, the firewall does masquerading to the local subnets (with local ip ranges). So should I set up an imq device on eth1 with iptables mangle through the prerouting chain to do traffic shaping to the subnets? In this case the packets arrive to eth1 already masqueraded (am I right?) and I can limit the ingress traffic of local adresses. Or should I use the imq on eth0? Doesn't it bothers egress shaping? I'm confused a little bit... :-s
Can you help me?Quoted 2 lines
Thanks
TomI feel imq+HTB on eth0 is an ideal solution for ur requirement.
Quoted 7 lines
Quoted 2 lines
Regards
-RaghuI'd like to filter the packages on their SNAT-ed (local) ip addresses. when the package enters the IMQ right after the iptables PREROUTING chain, does it have SNAT-ed ip addresses? As far as I know the SNAT happens in the POSTROUTING chain. Am I wrong? Or am I even more confused? :)
See
http://www.docum.org/stef.coene/qos/kptd/
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines
See
http://www.docum.org/stef.coene/qos/kptd/Stef
thanks, that's very useful for me
Tom
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines
Quoted 5 lines
I'd like to filter the packages on their SNAT-ed (local) ip addresses. when the package enters the IMQ right after the iptables PREROUTING chain, does it have SNAT-ed ip addresses? As far as I know the SNAT happens in the POSTROUTING chain. Am I wrong? Or am I even more confused? :)
See
http://www.docum.org/stef.coene/qos/kptd/Stef
Stef,
The picture you have in http://www.docum.org/stef.coene/qos/kptd is with (or without) the IMQ NAT patch?
Signature · 5 lines
Toshiro Viera <[email protected]> _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Toshiro Viera
Quoted 9 lines
Quoted 5 lines
I'd like to filter the packages on their SNAT-ed (local) ip addresses. when the package enters the IMQ right after the iptables PREROUTING chain, does it have SNAT-ed ip addresses? As far as I know the SNAT happens in the POSTROUTING chain. Am I wrong? Or am I even more confused? :)
Quoted 6 lines
Quoted 1 line
Stef
Stef,
The picture you have in http://www.docum.org/stef.coene/qos/kptd is with (or without) the IMQ NAT patch?
Without. In prerouting, you see that IMQ is before nat.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · you
Quoted 3 lines
The picture you have in http://www.docum.org/stef.coene/qos/kptd is with (or without) the IMQ NAT patch?
Without. In prerouting, you see that IMQ is before nat.
Stef
With the IMQ NAT patch the order is reversed? The filtering on de-masqueraded addresses is only possible, if NAT is b e f o r e IMQ, isn't it? Tom
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Szálka Tamás
Quoted 6 lines · you
Quoted 2 lines
The picture you have in http://www.docum.org/stef.coene/qos/kptd is with (or without) the IMQ NAT patch?
Without. In prerouting, you see that IMQ is before nat.
Stef
With the IMQ NAT patch the order is reversed? The filtering on de-masqueraded addresses is only possible, if NAT is b e f o r e IMQ, isn't it? Tom
The nat in prerouting is also reponsible for rewriting the addresses of natted packets. So you want IMQ after nat so the packets entering the imq device have the real ip address.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · you
Quoted 4 lines
With the IMQ NAT patch the order is reversed? The filtering on de-masqueraded addresses is only possible, if NAT is b e f o r e IMQ, isn't it? Tom
The nat in prerouting is also reponsible for rewriting the addresses of natted
packets. So you want IMQ after nat so the packets entering the imq device have the real ip address.Stef
What do mean by "real ip address"? So when the packet arrives into the imq, the address in the packet is the local (i.e. 10.0.0.x) address? Thanks
Tom
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Szálka Tamás
Quoted 9 lines · you
Quoted 3 lines
With the IMQ NAT patch the order is reversed? The filtering on de-masqueraded addresses is only possible, if NAT is b e f o r e IMQ, isn't it? Tom
The nat in prerouting is also reponsible for rewriting the addresses of natted
packets. So you want IMQ after nat so the packets entering the imq device have the real ip address.
Quoted 4 lines
Quoted 1 line
Stef
What do mean by "real ip address"? So when the packet arrives into the imq, the address in the packet is the local (i.e. 10.0.0.x) address?
Yes. At least it should.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/