Skip to contentSkip to conversation

consequences of changing the lo device name

LARTC vadiraj c s 2 participants 2 messages Sep 17, 2003

lore
Share & tools
lore
#0 lore raw

I changed my lo device name to lo:1 using ip command

this is what I did
ip link set dev lo name lo:1

my network did not respond and I had to reboot the system, I was not able to change it back or add lo device using ifconfig

Please let me know why did it happen, what does lo play in network?
I have eth0 assigned....

regards
vadiraj

___________________________________________________
Catering meets Camera; Tanya Weds Sahil. Rediff Matchmaker strikes another interesting match Visit http://matchmaker.rediff.com?1

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · vadiraj c s

I changed my lo device name to lo:1 using ip command

this is what I did
ip link set dev lo name lo:1

Quoted 7 lines

my network did not respond and I had to reboot the system, I was not able to change it back or add lo device using ifconfig

Please let me know why did it happen, what does lo play in network?
I have eth0 assigned....

Only 1 question : Why ?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/