Skip to contentSkip to conversation

Sequence and Default port

LARTC Raghuveer 2 participants 4 messages Sep 22, 2003 – Sep 23, 2003

lore
Share & tools
lore

Raghuveer

author
#0 lore raw

Hi All,

I have following queries :--

1. For indicating any default IP we are placing 0/0 as src or dst in the tc script, similarly what can I use for default port....?. This is the scenario when rules are framed based on ports. For example, For a firewall with eth0(WAN), eth1(LAN) and eth2(DMZ), Iam doing CBQ outgoing (egress) traffic shaping at eth0 interface for public hosted servers located at eth2(DMZ) based on ports(80 for http etc). Now I want to frame a rule for remaining traffic (default) allocating remaining bandwidth(total rate is 512Kbits, 256 Kbits provided to the hosted servers, rest 256KBits is for other traffic). My rules for identifying the hosted servers is based entirely on src port. Hence what rule should I frame for all other traffic coming from eth1(LAN).
2. Is the rule sequence play any role, like if there is any conflict between the rules then the last rule will be given preference. what happens exactly if there is any conflict...?

Any suggestions and reply is very much helpful.

Regards
-Raghu

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines · Raghuveer

Hi All,

I have following queries :--

Quoted 11 lines

1. For indicating any default IP we are placing 0/0 as src or dst in the tc script, similarly what can I use for default port....?. This is the scenario when rules are framed based on ports. For example, For a firewall with eth0(WAN), eth1(LAN) and eth2(DMZ), Iam doing CBQ outgoing (egress) traffic shaping at eth0 interface for public hosted servers located at eth2(DMZ) based on ports(80 for http etc). Now I want to frame a rule for remaining traffic (default) allocating remaining bandwidth(total rate is 512Kbits, 256 Kbits provided to the hosted servers, rest 256KBits is for other traffic). My rules for identifying the hosted servers is based entirely on src port. Hence what rule should I frame for all other traffic coming from eth1(LAN).

There is no such thing as default port. But I don't understand why you need this. I think it can be done with the dst/src parameter.

Quoted 3 lines

2. Is the rule sequence play any role, like if there is any conflict between the rules then the last rule will be given preference. what happens exactly if there is any conflict...?

The first rule that's a match wil be followed. Order is based on prio and the order they are entered.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Raghuveer

Hi Stef,

Quoted 20 lines · Stef Coene
Quoted 4 lines · Raghuveer

Hi All,

I have following queries :--

Quoted 13 lines

1. For indicating any default IP we are placing 0/0 as src or dst in the tc script, similarly what can I use for default port....?. This is the scenario when rules are framed based on ports. For example, For a firewall with eth0(WAN), eth1(LAN) and eth2(DMZ), Iam doing CBQ outgoing (egress) traffic shaping at eth0 interface for public hosted servers located at eth2(DMZ) based on ports(80 for http etc). Now I want to frame a rule for remaining traffic (default) allocating remaining bandwidth(total rate is 512Kbits, 256 Kbits provided to the hosted servers, rest 256KBits is for other traffic). My rules for identifying the hosted servers is based entirely on src port. Hence what rule should I frame for all other traffic coming from eth1(LAN).

Quoted 4 lines

There is no such thing as default port. But I don't understand why you need this. I think it can be done with the dst/src parameter.

Here are the rules Iam applying to control outgoing traffic at WAN(eth0) interface for public hosted services.
Here actual Isp rate = 512Kbit, rate taken = 97% of 512Kbit, eth0 ip is 192.168.1.2

tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 497Kbit weight 49Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 bounded
/* Hosted http server bandwidth = 64Kbit */
tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 64Kbit weight 6Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 192.168.1.2 match ip sport 80 0xffff classid 1:2

/* Hosted ftp server bandwidth = 64Kbit */
tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit rate 64Kbit weight 6Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 192.168.1.2 match ip sport 21 0xffff classid 1:3

/* Default : Rest/Other traffic */
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit rate 369Kbit weight 40Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 /* Here I want replace the below rule with a simple rule based only on port i.e by using some default port other than 80, 21 as sport, which according to your last mail is not possible, hence pls check whether the below rule will do for remaining traffic */
tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 0/0 match ip dst 0/0 classid 1:4

Pls let me know whether the above rules are framed correctly or can be done in a better way.

Quoted 9 lines
Quoted 5 lines

2. Is the rule sequence play any role, like if there is any conflict between the rules then the last rule will be given preference. what happens exactly if there is any conflict...?

The first rule that's a match wil be followed. Order is based on prio and the order they are entered.

Thanks for this confirmation.

Regards
-Raghu

Quoted 4 lines

Stef

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Raghuveer
Quoted 31 lines · Raghuveer

Here are the rules Iam applying to control outgoing traffic at WAN(eth0) interface for public hosted services.
Here actual Isp rate = 512Kbit, rate taken = 97% of 512Kbit, eth0 ip is 192.168.1.2

tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 497Kbit weight 49Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 bounded
/* Hosted http server bandwidth = 64Kbit */
tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate 64Kbit weight 6Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 192.168.1.2 match ip sport 80 0xffff classid 1:2

/* Hosted ftp server bandwidth = 64Kbit */
tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit rate 64Kbit weight 6Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 192.168.1.2 match ip sport 21 0xffff classid 1:3

/* Default : Rest/Other traffic */
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit rate 369Kbit weight 40Kbit prio 3 allot 1514 cell 8 maxburst 10 avpkt 1000 /* Here I want replace the below rule with a simple rule based only on port i.e by using some default port other than 80, 21 as sport, which according to your last mail is not possible, hence pls check whether the below rule will do for remaining traffic */
tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip src 0/0 match ip dst 0/0 classid 1:4

Quoted 2 lines

Pls let me know whether the above rules are framed correctly or can be done in a better way.

I can't do it better then you did :)

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/