Skip to contentSkip to conversation

Limit number of connections

LARTC [email protected] 1 participant 1 message Sep 23, 2003

lore
Share & tools
lore
#0 lore raw

Hello Rio,

Tuesday, September 23, 2003, 5:42:03 AM, you wrote:

Or you can use patch-o-matic connlimit + MARK.
"
This adds CONFIG_IP_NF_MATCH_CONNLIMIT match allows you to restrict the number of parallel TCP connections to a server per client IP address (or address block).

Examples:

# allow 2 telnet connections per client host
iptables -p tcp --syn --dport 23 -m connlimit --connlimit-above 2 -j REJECT
"

But i am not sure, it is perfomant solution.

Quoted 11 lines · Mihai Vlad
Quoted 11 lines

Hello again,
I have a router/nat linux box. I managed to create some HTB classes and everything is OK.
When perople are usig download managers like FlashGet and DAP (multiple connection ones), the ceil limiting works okay,
but the rate parameter is somehow useles... The guaranteed bandwidth is never reached.
So what can I do to limit the number of connections/computer? I want to make sure that they do not use more than one connection for the download manager.
Thanks in advance

RM> Actually this is not Bandwidth Limiter task,
RM> this is could be handled by your proxy, like Squid. Check the configuration RM> and enable maxconn ACL for file types: .exe .tar.gz .zip .iso .. etc ..

RM> - Rio.Martin -

RM> _______________________________________________
RM> LARTC mailing list / [email protected]
RM> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 6 lines
Best regards,
 Denis                            mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/