Skip to contentSkip to conversation

Proper filter syntax for matching Netfilter packet marks

LARTC Lance Dryden 3 participants 3 messages Sep 25, 2003

lore
Share & tools
lore
#0 lore raw

Howdy. Sorry if I make a mistake; this is my first list posting.

I'm running into ... somewhat conflicting and incomplete documentation when working out what exactly I'm to do in order to tc-filter match against packet MARKs set by NetFilter.

The syntax I'm trying looks like this:
tc filter add dev eth1 \
protocol ip \
parent 1:0 \
prio 1 \
handle 0x66 \
fw classid 1:102

But it apparently isn't working right; this is the only filter in an egress HTB queue discipline, and all my traffic goes through the default class instead of my special class. This is as per "tc -s -d class show ..."

Thanks for your time,
Lance Dryden

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 14 lines · Lance Dryden

Howdy. Sorry if I make a mistake; this is my first list posting.

I'm running into ... somewhat conflicting and incomplete documentation when working out what exactly I'm to do in order to tc-filter match against packet MARKs set by NetFilter.

The syntax I'm trying looks like this:

   tc filter add dev eth1 \
   protocol ip \
   parent 1:0 \
   prio 1 \
   handle 0x66 \
   fw classid 1:102
Quoted 4 lines

But it apparently isn't working right; this is the only filter in an egress HTB queue discipline, and all my traffic goes through the default class instead of my special class. This is as per "tc -s -d class show ..."

Can you check your iptables ruls so you are sure the mark gets placed?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Lance Dryden
Quoted 5 lines
Quoted 4 lines

But it apparently isn't working right; this is the only filter in an egress HTB queue discipline, and all my traffic goes through the default class instead of my special class. This is as per "tc -s -d class show ..."

Can you check your iptables ruls so you are sure the mark gets placed?

In case your NetFilter rules really match and packet are marked, then you should try using hexadecimal for marks. I know ip(8) interprets marks as hexadecimal, although it's not documented AFAIK. I don't have time to look at it in tc(8), but there are good chances it runs in the same way.

I have posted a mail on this inconsistency one week ago, but no one replied.
http://mailman.ds9a.nl/pipermail/lartc/2003q3/010074.html

Regards,

Signature · 5 lines
Jeremie aka TtZ/TataZ
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/