Skip to contentSkip to conversation

HTB and metro+int. limits part2

LARTC Alex 1 participant 1 message Oct 1, 2003

lore
Share & tools
lore

Alex

author
#0 lore raw

I forgot to say that I have put my script on
http://retea.hostingcenter.ro/htb.txt
Maybe someone could lead to to the correct sintax if there's something wrong.

Alex
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Alex" <[email protected]>; "Lartc" <[email protected]>; <[email protected]>
Sent: Wednesday, October 01, 2003 12:59 PM
Subject: Re: [LARTC] Re: HTB and metro+int. limits

Quoted 2 lines · Alex
Quoted 1 line

Thanks for your replay, it really helps, but to take the question

further,

Quoted 1 line
Quoted 1 line

from what you have seen in my sample script, how should I classify

packets

Quoted 1 line
Quoted 1 line

with "tc" ? I don't know how to put them in separate classes,. What I

have

Quoted 1 line
Quoted 1 line

in my script will only shape metro traffic, but for international how

would

Quoted 5 lines
Quoted 5 lines

the "tc" command be?
Something like:
/sbin/tc class add dev eth2 parent 1:2 classid 2:11 htb rate 50kbit ceil 100kbit prio 5
/sbin/tc filter add dev eth2 parent 1:0 protocol ip prio 5 u32 match ip

dst

Quoted 3 lines
Quoted 2 lines

192.168.254.10 flowid 1:11
Would this be the correct commands?

No. You create a class with a wrong number. If the parent class is 1:x,

the

Quoted 11 lines

class name has to be 1:y.

Quoted 9 lines

Thanks again.

Alex
---begin my script----
sbin/tc qdisc add dev eth2 root handle 1: htb default 10 /sbin/tc class add dev eth2 parent 1: classid 1:1 htb rate 10M #metro
/sbin/tc class add dev eth2 parent 1:1 classid 1:10 htb rate 10M /sbin/tc filter add dev eth2 protocol ip parent 1:10 prio 3 handle 6

flowid

Quoted 2 lines
Quoted 1 line

1:10

This filter will not do much (typo?). You attach it to class 1:10 (the

parent

Quoted 4 lines

parameter). This should be 1: so all packets leaving eth2 will be checked against this filter.
And is 10M working? Normally 10mbit is used.

Quoted 11 lines

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/