Excess bandwidth sharing
Hello there,
I do
tc qdisc add dev eth0 root handle 1: htb r2q 1 default 12 tc class add dev eth0 parent 1:1 classid 1:10 htb rate 64kbit ceil 512kbit tc class add dev eth0 parent 1:1 classid 1:11 htb rate 256kbit ceil 512kbit
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
match ip dst 195.28.103.7 flowid 1:10
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
match ip dst 195.28.103.5 flowid 1:11and I expect both streams to share the total 512kbit in proportion of their rates (1/4). Unfortunately the rates are some 100/120, total 512kbit.
Can anyone tell me whatsda problem?
This behavior may vary when all rates are different. Thanks, Tom Olexa
Signature · 7 lines
Potrebujete vice prostoru pro vase stranky? Ptejte se na http://sluzby.volny.cz/cs/product/ftp_paid _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Tom Olexa
Hello there,
I do
tc qdisc add dev eth0 root handle 1: htb r2q 1 default 12 tc class add dev eth0 parent 1:1 classid 1:10 htb rate 64kbit ceil 512kbit tc class add dev eth0 parent 1:1 classid 1:11 htb rate 256kbit ceil 512kbittc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
Quoted 8 lines
match ip dst 195.28.103.7 flowid 1:10 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \ match ip dst 195.28.103.5 flowid 1:11and I expect both streams to share the total 512kbit in proportion of their rates (1/4). Unfortunately the rates are some 100/120, total 512kbit.
Can anyone tell me whatsda problem?
Your commands :
tc qdisc add dev eth0 root handle 1: htb r2q 1 default 12
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 64kbit ceil 512kbit tc class add dev eth0 parent 1:1 classid 1:11 htb rate 256kbit ceil 512kbit
And I think you miss this rule :
tc class add dev eth0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit
12 is your default class, but you never defined a 1:12 class.
This will happen :
1:10 : 64kbit (the configured rate)
1:11 : 256kbit (the configured rate)
Together : 320kbit
But the total is 512kbit, so 512-320 = 192kbit.
So class 1:10 get's an additional 192 * 64 / (64 + 256 ) = 38.4 kbit So class 1:11 get's an additional 192 * 256 / (64 + 256 ) = 153.6 kbit Actually, this is related to the quantum of the class. But you never overruled the quantum, so the quantum of the class is rate / 1 (r2q parameter. But 512kbit means a quantum of 512 / 8 = 64kilo byte and I think this is maybe too big. Don't you have htb errors in your kernel log files ??
If you are interested in more tests and extra information, see www.docum.org on my tests pages.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/