Skip to contentSkip to conversation

using RED and TBF simultaneously

LARTC Yung Yi 2 participants 2 messages Oct 10, 2003

lore
Share & tools
lore

Yung Yi

author
#0 lore raw

Dear all,

Can I use RED and TBF simulatanesouly, so that the output packet of RED queue will be filtered by TBF?
What I would like to do is that using RED queue disc I want to limit the output capacity of the corresponding interface.

I'm a little worried about the scenario that TBF is first applied and then RED is used, which I do not want.

Thanks.

- Yung

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Yung Yi

Dear all,

Can I use RED and TBF simulatanesouly, so that the output packet of RED queue will be filtered by TBF?
What I would like to do is that using RED queue disc I want to limit the output capacity of the corresponding interface.

I'm a little worried about the scenario that TBF is first applied and then RED is used, which I do not want.

You can use htb. Htb is like tbf but it supports classes. You can add the RED qdisc to a limit htb class. A limited htb class is a tbf qdisc.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/