Priorizing bandwidth share
Hi folks,
I have tested Priorizing bandwidth share feature of HTB and it results very bad.
My test environment is something like below. There only 2 PCs on my LAN
Internet
|
ADSL
| eth1
Linux box (iptables + HTB)
| eth0 (192.168.1.254)
----------------------------
| LAN |
PC1 PC2
(192.168.1.1) (192.168.1.2)My ADSL is 512K up/down. Infact, the real bandwidth is about 450K in almost time.
Below is my tc script:
/bin/tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 2: htb r2q 1
tc class add dev eth0 parent 2: classid 2:1 htb rate 512Kbit ceil 512Kbit
iptables -t mangle -A POSTROUTING -o eth0 -d 192.168.1.1 -j MARK --set-mark 12
iptables -t mangle -A POSTROUTING -o eth0 -d 192.168.1.2 -j MARK --set-mark 14
tc class add dev eth0 parent 2:1 classid 2:12 htb rate 400Kbit ceil 512Kbit prio 0
tc qdisc add dev eth0 parent 2:12 sfq
tc filter add dev eth0 parent 2:0 protocol ip prio 0 handle 12 fw classid 2:12
tc class add dev eth0 parent 2:1 classid 2:14 htb rate 100Kbit ceil 512Kbit prio 7
tc qdisc add dev eth0 parent 2:14 sfq
tc filter add dev eth0 parent 2:0 protocol ip prio 7 handle 14 fw classid 2:14
Firstly, I start downloading an iso image from PC1, it can reach 448K. Then I start downloading from PC2, then the bandwidth of class 12 (PC1) is down to about 216K and bandwidth of class 14 (PC2) is about 220K.
So it's not what I've expected. Since I set the priority of class 12 ( = 0 ) higher than priority of class 14 ( = 7 ). In addition, the bandwidth of class 12 is assigned 4 time bigger than class 14. As I've expect, class 12 should be assigned enough bandwidth (400K), and class 14 only get about 50K.
I've tried with both HTB2 (I've removed HTB3 code from kernel 2.4.22, and patched it with HTB2 source code from HTB home page) and HTB3 (used original kernel 2.4.22). The result above is of HTB2. The result of HTB3 even worse.
Any idea?
regards,
Dong
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 59 lines · Nguyen Dang Phuoc Dong
Hi folks,
I have tested Priorizing bandwidth share feature of HTB and it results very bad.
My test environment is something like below. There only 2 PCs on my LAN
Internet
ADSL
| eth1Linux box (iptables + HTB)
| eth0 (192.168.1.254)----------------------------
| LAN |
PC1 PC2
(192.168.1.1) (192.168.1.2)My ADSL is 512K up/down. Infact, the real bandwidth is about 450K in almost time.
Below is my tc script:
/bin/tcqdisc del dev eth0 root
tc qdisc add dev eth0 root handle 2: htb r2q 1
tc class add dev eth0 parent 2: classid 2:1 htb rate 512Kbit ceil 512Kbitiptables -t mangle -A POSTROUTING -o eth0 -d 192.168.1.1 -j MARK --set-mark 12
iptables -t mangle -A POSTROUTING -o eth0 -d 192.168.1.2 -j MARK --set-mark 14tc class add dev eth0 parent 2:1 classid 2:12 htb rate 400Kbit ceil 512Kbit prio 0
tc qdisc add dev eth0 parent 2:12 sfq
tc filter add dev eth0 parent 2:0 protocol ip prio 0 handle 12 fw classid 2:12tc class add dev eth0 parent 2:1 classid 2:14 htb rate 100Kbit ceil 512Kbit prio 7
tc qdisc add dev eth0 parent 2:14 sfq
tc filter add dev eth0 parent 2:0 protocol ip prio 7 handle 14 fw classid 2:14Firstly, I start downloading an iso image from PC1, it can reach 448K. Then I start downloading from PC2, then the bandwidth of class 12 (PC1) is down to about 216K and bandwidth of class 14 (PC2) is about 220K.
So it's not what I've expected. Since I set the priority of class 12 ( = 0 ) higher than priority of class 14 ( = 7 ). In addition, the bandwidth of class 12 is assigned 4 time bigger than class 14. As I've expect, class 12 should be assigned enough bandwidth (400K), and class 14 only get about 50K.
Quoted 6 lines
I've tried with both HTB2 (I've removed HTB3 code from kernel 2.4.22, and patched it with HTB2 source code from HTB home page) and HTB3 (used original kernel 2.4.22). The result above is of HTB2. The result of HTB3 even worse.
Any idea?
Yes. You said yourself that your link is 450K, so limit all traffic to 445K so YOU are the bottleneck and not your ADSL router.
Also, your r2q setting is too low.
And for more htb tests, info and a faq, see www.docum.org.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/