Outgoing link slow down
Dear all,
I have run cbq on my network to control both incoming and outgoing traffic. I have my redhat with two network interface installed, eth0 (LAN interface) and eth1 (WAN interface). As for my current configuration is, outgoing traffic controlled on eth1 and incoming will be controll on eth0.
But then my upload link started to slow down badly, which i have no idea why this happen, can anyone help on this?
Thank you very much!!!
Rachel
_________________________________________________________________
Using a handphone prepaid card? Reload your credit online!
http://www.msn.com.my/reloadredir/default.asp
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · rAcHeL ^cY
Dear all,
I have run cbq on my network to control both incoming and outgoing traffic. I have my redhat with two network interface installed, eth0 (LAN interface) and eth1 (WAN interface). As for my current configuration is, outgoing traffic controlled on eth1 and incoming will be controll on eth0.
But then my upload link started to slow down badly, which i have no idea why this happen, can anyone help on this?
Try to install a traffic monitor to find out what's using your link. Do you have the same problem if you delete the tc setup?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/