Deleting filters from a hashtable
Hi,
I'm trying to delete filters from a hashtable programatically, but am being foiled by one small problem:
I can delete the rule with no difficulty given the full handle like so:
tc filter del dev eth2 pref 5 handle 2:fe:800 u32
First, my understanding is that, in this case:
2 => table
fe => column
800 =>row (or vice versa)
Is this correct?
Given that, I suppose I need to know how to delete an entry without knowing which row it was inserted into. Alternatively, can I explicitly set the row into which I am inserting? Here is what I'm doing now:
tc filter add dev eth2 parent 1:0 protocol ip prio 1 u32 ht 2:fe: match
ip dst 192.168.255.254/32 flowid 1:fe; (Where, notably, "fffe" is the last two octets of the IP, and fe is the last.)
Any help would be *much* appreciated. My brain is starting to melt ;)
-Paul
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
sorry paul, meant to answer in list.....
an alternate approach to this problem might be to keep your rules in a database such as mysql and have a simple script file which builds and runs the filter script.
this would allow you to add extra id and comment fields in the database which can be used by your program to decide which rules should be applied at any given time.
such a setup makes the task of identifing, deleting and adding rules much easier as you can use complex programs and sql statements on the database. You no longer have to worry about how to pick out a certian rule from a textfile or installed ruleset as your build script simple replaces all rules with a set selected from the DB
----- Original Message -----
From: "Paul J. Caritj" <[email protected]>
To: <[email protected]>
Sent: Thursday, October 23, 2003 4:59 PM
Subject: [LARTC] Deleting filters from a hashtable
Quoted 21 lines
Hi,
I'm trying to delete filters from a hashtable programatically, but am being foiled by one small problem:I can delete the rule with no difficulty given the full handle like so:
tc filter del dev eth2 pref 5 handle 2:fe:800 u32First, my understanding is that, in this case:
2 => table
fe => column
800 =>row (or vice versa)
Is this correct?Given that, I suppose I need to know how to delete an entry without knowing which row it was inserted into. Alternatively, can I explicitly set the row into which I am inserting? Here is what I'm doing now:
tc filter add dev eth2 parent 1:0 protocol ip prio 1 u32 ht 2:fe: match
ip dst 192.168.255.254/32 flowid 1:fe; (Where, notably, "fffe" is the last two octets of the IP, and fe is the last.)
Quoted 8 lines
Any help would be *much* appreciated. My brain is starting to melt ;)
-Paul
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/